Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Addressed | 2024-10-17 |
| TT | Health-based | Addressed | 2024-10-17 |
| TT | Health-based | Addressed | 2024-10-17 |
| TT | Health-based | Resolved | 2019-07-04 |
| TT | Health-based | Resolved | 2019-07-04 |
| TT | Health-based | Resolved | 2019-07-04 |
| TT | Health-based | Resolved | 2019-07-04 |
| Other | Monitoring | Unaddressed | 2026-04-02 |
| Other | Monitoring | Unaddressed | 2025-07-01 |
| Other | Monitoring | Unaddressed | 2025-05-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 2100 µg/L 162% of the EPA limit, in the worst sample — 1300 µg/L | 67/81 | SYR4 | 2012–2017 |
| Nitrate | 162 µg/L 1.6% of the EPA limit 10000 µg/L | 64/86 | SYR4 | 2012–2019 |
| Lead | 29.3 µg/L 195% of the EPA limit, in the worst sample — 15 µg/L | 26/81 | SYR4 | 2012–2017 |
| Barium | 38 µg/L 1.9% of the EPA limit 2000 µg/L | 12/12 | SYR4 | 2012–2018 |
| Bromodichloromethane | 6.16 µg/L No EPA limit set | 12/51 | SYR4 | 2012–2019 |
| Fluoride | 228 µg/L 5.7% of the EPA limit 4000 µg/L | 12/12 | SYR4 | 2012–2018 |
| Chloroform | 15.8 µg/L No EPA limit set | 11/51 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2025 |
| Dibromochloromethane | 3.18 µg/L No EPA limit set | 10/51 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 162 µg/L 1.6% of the EPA limit 10000 µg/L | 9/14 | SYR4 | 2012–2019 |
| Chromium | 4.9 µg/L 4.9% of the EPA limit 100 µg/L | 7/12 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 6/6 | SYR4 | 2012–2018 |
| Xylenes, Total | 2.87 µg/L 0% of the EPA limit 10000 µg/L | 6/34 | SYR4 | 2012–2019 |
| Selenium | 2.2 µg/L 4.4% of the EPA limit 50 µg/L | 5/12 | SYR4 | 2012–2018 |
| TTHM | 11.5 µg/L 14% of the EPA limit 80 µg/L | 5/17 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 3.6 µg/L No EPA limit set | 3/17 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 7 µg/L 12% of the EPA limit 60 µg/L | 3/17 | SYR4 | 2012–2019 |
| Atrazine | 0.2000 µg/L 6.7% of the EPA limit 3 µg/L | 1/18 | SYR4 | 2015–2019 |
| Di(2-ethylhexyl) Phthalate | 0.5000 µg/L 8.3% of the EPA limit 6 µg/L | 1/18 | SYR4 | 2015–2019 |
| Ethylbenzene | 0.6100 µg/L 0.1% of the EPA limit 700 µg/L | 1/34 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.4 µg/L No EPA limit set | 1/17 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Melrose Wsc
Is Melrose Wsc tap water safe to drink?
EPA monitoring detected 21 contaminants in Melrose Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Melrose Wsc's water?
EPA monitoring detected Copper, Nitrate, Lead, Barium, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Melrose Wsc serve?
Melrose Wsc reports serving 3,143 people in Texas, per its EPA record.
Has Melrose Wsc had any water quality violations?
The EPA has 415 violations on file for Melrose Wsc, of which 7 are health-based (a contaminant limit or required treatment was breached) and 10 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.