Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2013-09-01 |
| TT | Health-based | Resolved | 2013-09-01 |
| TT | Health-based | Resolved | 2013-09-01 |
| TT | Health-based | Resolved | 2012-12-01 |
| TT | Health-based | Resolved | 2012-12-01 |
| TT | Health-based | Resolved | 2012-12-01 |
| TT | Health-based | Resolved | 2012-12-01 |
| Other | Monitoring | Unaddressed | 2025-07-01 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-12-31 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 358 µg/L 28% of the EPA limit 1300 µg/L | 70/72 | SYR4 | 2012–2018 |
| Lead | 27.3 µg/L 182% of the EPA limit, in the worst sample — 15 µg/L | 27/72 | SYR4 | 2012–2018 |
| Nitrate | 30 µg/L 0.3% of the EPA limit 10000 µg/L | 12/14 | SYR4 | 2012–2019 |
| Dibromochloromethane | 21.6 µg/L No EPA limit set | 11/15 | SYR4 | 2012–2019 |
| TTHM | 90.5 µg/L 113% of the EPA limit, in the worst sample — 80 µg/L | 10/12 | SYR4 | 2012–2019 |
| Bromodichloromethane | 31.7 µg/L No EPA limit set | 8/15 | SYR4 | 2012–2019 |
| Lead | 0.00083 mg/L 5.5% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2024 |
| Bromoform | 4.7 µg/L No EPA limit set | 5/15 | SYR4 | 2012–2019 |
| Chloroform | 32.5 µg/L No EPA limit set | 4/15 | SYR4 | 2012–2019 |
| Barium | 146 µg/L 7.3% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Fluoride | 880 µg/L 22% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 4.3 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 14.5 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.7 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.9 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 20 µg/L 0.2% of the EPA limit 10000 µg/L | 1/2 | SYR4 | 2013–2019 |
| Selenium | 4.3 µg/L 8.6% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 39.9 µg/L 66% of the EPA limit 60 µg/L | 1/12 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 15.5 µg/L No EPA limit set | 1/12 | SYR4 | 2012–2019 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Montgomery County Mud 88
Is Montgomery County Mud 88 tap water safe to drink?
EPA monitoring detected 19 contaminants in Montgomery County Mud 88's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Montgomery County Mud 88's water?
EPA monitoring detected Copper, Lead, Nitrate, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Montgomery County Mud 88 serve?
Montgomery County Mud 88 reports serving 3,183 people in Texas, per its EPA record.
Has Montgomery County Mud 88 had any water quality violations?
The EPA has 45 violations on file for Montgomery County Mud 88, of which 7 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.