Compliance record
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| PFBS | 0.0035 µg/L | 2/8 | 2024 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1270 µg/L 98% of the EPA limit 1300 µg/L | 58/66 | SYR4 | 2012–2019 |
| Nitrate | 260 µg/L 2.6% of the EPA limit 10000 µg/L | 32/64 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5 µg/L No EPA limit set | 19/29 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.6 µg/L No EPA limit set | 17/29 | SYR4 | 2012–2019 |
| Bromoform | 3.5 µg/L No EPA limit set | 15/29 | SYR4 | 2012–2019 |
| Chloroform | 2.7 µg/L No EPA limit set | 13/29 | SYR4 | 2012–2019 |
| Lead | 0.00049 mg/L 3.2% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Barium | 171 µg/L 8.6% of the EPA limit 2000 µg/L | 10/10 | SYR4 | 2012–2019 |
| Lead | 2.7 µg/L 18% of the EPA limit 15 µg/L | 8/66 | SYR4 | 2012–2019 |
| TTHM | 12.3 µg/L 15% of the EPA limit 80 µg/L | 8/10 | SYR4 | 2013–2019 |
| Lithium | 20.2 µg/L No EPA limit set | 8/8 | UCMR-5 | 2024 |
| Combined Radium (-226 And -228) | 2.5 pCi/L 50% of the EPA limit 5 pCi/L | 7/7 | SYR4 | 2012–2018 |
| Fluoride | 170 µg/L 4.3% of the EPA limit 4000 µg/L | 7/9 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 215 µg/L 2.2% of the EPA limit 10000 µg/L | 6/13 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 3.1 µg/L 5.2% of the EPA limit 60 µg/L | 6/9 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.7 µg/L No EPA limit set | 5/9 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.4 µg/L No EPA limit set | 4/9 | SYR4 | 2013–2019 |
| Chromium | 1.71 µg/L 1.7% of the EPA limit 100 µg/L | 2/10 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.7000 µg/L 0% of the EPA limit 10000 µg/L | 2/21 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 0.7700 µg/L 13% of the EPA limit 6 µg/L | 1/14 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4.7 pCi/L No EPA limit set | 1/10 | SYR4 | 2012–2018 |
| Toluene | 1.37 µg/L 0.1% of the EPA limit 1000 µg/L | 1/21 | SYR4 | 2012–2019 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Milano Wsc
Is Milano Wsc tap water safe to drink?
EPA monitoring detected 23 contaminants in Milano Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Milano Wsc's water?
EPA monitoring detected Copper, Nitrate, Dibromochloromethane, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Milano Wsc serve?
Milano Wsc reports serving 4,308 people in Texas, per its EPA record.
Has Milano Wsc had any water quality violations?
The EPA has no formal drinking-water violations on file for Milano Wsc.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.