Tap WaterIndex

← Texas

Tap water quality report

Moores Water

EPA monitoring tested this supplier for 12 contaminants and detected 7. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

12
contaminants tested
7
detected
285
people served
127
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
GWP
Ownership
Private
Counties served
McLennan

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

127
health-based violations
1,611
violations on file
364
still open
ViolationTypeStatusPeriod
TT Health-based Unaddressed 2024-10-17
TT Health-based Unaddressed 2024-10-17
MCL Health-based Resolved 2017-07-01 → 2017-09-30
MCL Health-based Resolved 2017-07-01 → 2017-09-30
MCL Health-based Resolved 2017-07-01 → 2017-09-30
MCL Health-based Resolved 2017-07-01 → 2017-09-30
MCL Health-based Resolved 2017-04-01 → 2017-06-30
MCL Health-based Resolved 2017-04-01 → 2017-06-30
MCL Health-based Resolved 2017-04-01 → 2017-06-30
MCL Health-based Resolved 2017-04-01 → 2017-06-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Lead
0.0012 mg/L 8%
of the EPA limit 0.0150 mg/L
 4/4 LCR 1999
Bromodichloromethane
1.14 µg/L
No EPA limit set
 1/1 SYR4 2013
Bromoform
6.36 µg/L
No EPA limit set
 1/1 SYR4 2013
Dibromoacetic Acid
1.7 µg/L
No EPA limit set
 1/1 SYR4 2013
Dibromochloromethane
2.99 µg/L
No EPA limit set
 1/1 SYR4 2013
TTHM
10.5 µg/L 13%
of the EPA limit 80 µg/L
 1/1 SYR4 2013
Total Haloacetic Acids (HAA5)
1.7 µg/L 2.8%
of the EPA limit 60 µg/L
 1/1 SYR4 2013
5 contaminants tested, none detected
ChloroformDichloroacetic AcidMonobromoacetic AcidMonochloroacetic AcidTrichloroacetic Acid

Utility contact

Contact
MOORE, JOHN, L
Phone
254-863-5079

Frequently asked questions about Moores Water

Is Moores Water tap water safe to drink?

EPA monitoring detected 7 contaminants in Moores Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Moores Water's water?

EPA monitoring detected Lead, Bromodichloromethane, Bromoform, Dibromoacetic Acid, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does Moores Water serve?

Moores Water reports serving 285 people in Texas, per its EPA record.

Has Moores Water had any water quality violations?

The EPA has 1611 violations on file for Moores Water, of which 127 are health-based (a contaminant limit or required treatment was breached) and 364 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.