Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 750.5 µg/L 58% of the EPA limit 1300 µg/L
worst single sample: 860 µg/L | 100/100 | SYR4 | 2012–2019 |
| Bromodichloromethane | 17.62 µg/L No EPA limit set
worst single sample: 25 µg/L | 50/50 | SYR4 | 2012–2019 |
| Chloroform | 28.055 µg/L No EPA limit set
worst single sample: 45.9 µg/L | 50/50 | SYR4 | 2012–2019 |
| Dibromochloromethane | 10.111 µg/L No EPA limit set
worst single sample: 10.9 µg/L | 50/50 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 22.84 µg/L No EPA limit set
worst single sample: 37.9 µg/L | 50/50 | SYR4 | 2012–2019 |
| TTHM | 52.21 µg/L 65% of the EPA limit 80 µg/L
worst single sample: 79.6 µg/L | 50/50 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 41.3 µg/L 69% of the EPA limit 60 µg/L
worst single sample: 51.9 µg/L | 50/50 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 8.155 µg/L No EPA limit set
worst single sample: 14.8 µg/L | 50/50 | SYR4 | 2012–2019 |
| Lead | 4.19 µg/L 28% of the EPA limit 15 µg/L
worst single sample: 8.1 µg/L | 47/100 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.12 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 29/50 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 15.175 µg/L No EPA limit set
worst single sample: 17.5 µg/L | 16/50 | SYR4 | 2012–2019 |
| Bromoform | 3.262 µg/L No EPA limit set
worst single sample: 3.43 µg/L | 15/50 | SYR4 | 2012–2019 |
| Lead | 0.00085 mg/L 5.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Monobromoacetic Acid | 1.66 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 9/50 | SYR4 | 2012–2019 |
28 contaminants tested, none detected
Utility contact
Frequently asked questions about High Point Sud
Is High Point Sud tap water safe to drink?
EPA monitoring detected 16 contaminants in High Point Sud's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in High Point Sud's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does High Point Sud serve?
High Point Sud reports serving 16,341 people in Texas, per its EPA record.
Has High Point Sud had any water quality violations?
The EPA has 60 violations on file for High Point Sud, of which 25 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.