Tap WaterIndex

← Texas

Tap water quality report

Thomas Acres

EPA monitoring tested this supplier for 79 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
19
detected
165
people served
4
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
Ground water
Ownership
Private
Counties served
Johnson

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

4
health-based violations
267
violations on file
3
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
MR Monitoring Unaddressed 2025-05-28
MR Monitoring Unaddressed 2025-05-28
MR Monitoring Unaddressed 2025-05-28
Other Monitoring Resolved 2025-05-01
Other Monitoring Resolved 2025-05-01
RPT Monitoring Resolved 2024-10-17

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
280.1 µg/L 2.8%
of the EPA limit 10000 µg/L
worst single sample: 290 µg/L
30/32 SYR4 2012–2019
Copper
58.09 µg/L 4.5%
of the EPA limit 1300 µg/L
worst single sample: 58.3 µg/L
15/19 SYR4 2012–2018
Bromoform
4.098 µg/L
No EPA limit set
worst single sample: 4.65 µg/L
13/13 SYR4 2013–2019
Dibromochloromethane
3.866 µg/L
No EPA limit set
worst single sample: 3.95 µg/L
13/13 SYR4 2013–2019
Bromodichloromethane
2.264 µg/L
No EPA limit set
worst single sample: 2.62 µg/L
9/13 SYR4 2013–2019
Barium
2.345 µg/L 0.1%
of the EPA limit 2000 µg/L
worst single sample: 2.36 µg/L
6/6 SYR4 2012–2019
Chromium
5.1425 µg/L 5.1%
of the EPA limit 100 µg/L
worst single sample: 5.39 µg/L
6/6 SYR4 2012–2019
Combined Radium (-226 And -228)
1.5 pCi/L 30%
of the EPA limit 5 pCi/L
 6/6 SYR4 2012–2019
Fluoride
735.5 µg/L 18%
of the EPA limit 4000 µg/L
worst single sample: 802 µg/L
6/6 SYR4 2013–2019
Nitrate-Nitrite
256.25 µg/L 2.6%
of the EPA limit 10000 µg/L
worst single sample: 290 µg/L
6/6 SYR4 2012–2015
Lead
2.22 µg/L 15%
of the EPA limit 15 µg/L
worst single sample: 2.3 µg/L
3/19 SYR4 2012–2018
TTHM
10.528 µg/L 13%
of the EPA limit 80 µg/L
worst single sample: 10.7 µg/L
3/3 SYR4 2013–2019
Lead
0.00060 mg/L 4%
of the EPA limit 0.0150 mg/L
 2/2 LCR 2024
Total Haloacetic Acids (HAA5)
3.85 µg/L 6.4%
of the EPA limit 60 µg/L
worst single sample: 4 µg/L
2/3 SYR4 2013–2019
Cyanide
17.1 µg/L 8.6%
of the EPA limit 200 µg/L
 1/4 SYR4 2014–2017
Chloroform
1.78 µg/L
No EPA limit set
 1/13 SYR4 2013–2019
Dibromoacetic Acid
1 µg/L
No EPA limit set
 1/3 SYR4 2013–2019
Monobromoacetic Acid
4 µg/L
No EPA limit set
 1/3 SYR4 2013–2019
Selenium
1.14 µg/L 2.3%
of the EPA limit 50 µg/L
 1/6 SYR4 2012–2019
60 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
DYCHE, JAMES, A
Phone
817-645-5493
Email
MLDYCHE@GMAIL.COM

Frequently asked questions about Thomas Acres

Is Thomas Acres tap water safe to drink?

EPA monitoring detected 19 contaminants in Thomas Acres's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Thomas Acres's water?

EPA monitoring detected Nitrate, Copper, Bromoform, Dibromochloromethane, Bromodichloromethane, and others. The full list with the level and data source for each is above.

How many people does Thomas Acres serve?

Thomas Acres reports serving 165 people in Texas, per its EPA record.

Has Thomas Acres had any water quality violations?

The EPA has 267 violations on file for Thomas Acres, of which 4 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.