Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2006-12-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-12-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-12-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-12-01 → 2006-12-31 |
| Other | Monitoring | Unaddressed | 2025-07-01 |
| MR | Monitoring | Archived | 2021-01-01 → 2023-12-31 |
| MR | Monitoring | Archived | 2021-01-01 → 2023-12-31 |
| MR | Monitoring | Archived | 2021-01-01 → 2023-12-31 |
| MR | Monitoring | Archived | 2021-01-01 → 2023-12-31 |
| MR | Monitoring | Archived | 2021-01-01 → 2023-12-31 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0065 µg/L | 1/16 | 2024 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 239 µg/L 18% of the EPA limit 1300 µg/L | 63/64 | SYR4 | 2013–2017 |
| Dibromochloromethane | 28.6 µg/L No EPA limit set | 43/43 | SYR4 | 2013–2019 |
| Bromoform | 29.1 µg/L No EPA limit set | 42/43 | SYR4 | 2013–2019 |
| Bromodichloromethane | 22.9 µg/L No EPA limit set | 22/43 | SYR4 | 2013–2019 |
| TTHM | 76.5 µg/L 96% of the EPA limit 80 µg/L | 17/17 | SYR4 | 2013–2019 |
| Chloroform | 14.1 µg/L No EPA limit set | 16/43 | SYR4 | 2013–2019 |
| Lithium | 71.4 µg/L No EPA limit set | 15/16 | UCMR-5 | 2024 |
| Lead | 0.0015 mg/L 9.9% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Total Haloacetic Acids (HAA5) | 51.6 µg/L 86% of the EPA limit 60 µg/L | 13/17 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 12.8 µg/L No EPA limit set | 12/17 | SYR4 | 2013–2019 |
| Lead | 2.32 µg/L 15% of the EPA limit 15 µg/L | 12/64 | SYR4 | 2013–2017 |
| Dibromoacetic Acid | 15.3 µg/L No EPA limit set | 11/17 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 2 µg/L No EPA limit set | 8/17 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 18.5 µg/L No EPA limit set | 8/17 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 4.7 µg/L No EPA limit set | 6/17 | SYR4 | 2013–2019 |
28 contaminants tested, none detected
Utility contact
Frequently asked questions about Bethany Sud
Is Bethany Sud tap water safe to drink?
EPA monitoring detected 16 contaminants in Bethany Sud's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bethany Sud's water?
EPA monitoring detected Copper, Dibromochloromethane, Bromoform, Bromodichloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Bethany Sud serve?
Bethany Sud reports serving 4,503 people in Texas, per its EPA record.
Has Bethany Sud had any water quality violations?
The EPA has 47 violations on file for Bethany Sud, of which 4 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.