Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
0
health-based violations
15
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2025-12-30 |
| MR | Monitoring | Resolved | 2025-12-30 |
| Other | Monitoring | Resolved | 2025-08-24 |
| Other | Monitoring | Resolved | 2025-08-24 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Archived | 2020-04-01 → 2020-06-30 |
| MR | Monitoring | Archived | 2020-04-01 → 2020-06-30 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0076 µg/L | 3/4 | 2024 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the single worst sample on
record — over 100% is worth reading, but is not by itself a violation.
Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 48 µg/L No EPA limit set | 183/185 | SYR4 | 2012–2019 |
| Chloroform | 89.1 µg/L No EPA limit set | 177/185 | SYR4 | 2012–2019 |
| Dibromochloromethane | 41.8 µg/L No EPA limit set | 168/185 | SYR4 | 2012–2019 |
| TTHM | 117 µg/L 146% of the EPA limit, in the worst sample — 80 µg/L | 135/138 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 40.1 µg/L No EPA limit set | 134/135 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 77.5 µg/L 129% of the EPA limit, in the worst sample — 60 µg/L | 134/135 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 17.5 µg/L No EPA limit set | 129/135 | SYR4 | 2012–2019 |
| Nitrate | 435 µg/L 4.4% of the EPA limit 10000 µg/L | 120/124 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 28.6 µg/L No EPA limit set | 77/135 | SYR4 | 2012–2019 |
| Copper | 581 µg/L 45% of the EPA limit 1300 µg/L | 73/110 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 4.8 µg/L No EPA limit set | 71/135 | SYR4 | 2012–2019 |
| Bromoform | 28.6 µg/L No EPA limit set | 65/185 | SYR4 | 2012–2019 |
| Fluoride | 2170 µg/L 54% of the EPA limit 4000 µg/L | 32/32 | SYR4 | 2012–2019 |
| Barium | 79 µg/L 4% of the EPA limit 2000 µg/L | 27/27 | SYR4 | 2013–2019 |
| Lead | 40.5 µg/L 270% of the EPA limit, in the worst sample — 15 µg/L | 27/110 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 3.9 µg/L No EPA limit set | 20/135 | SYR4 | 2012–2019 |
| Chromium | 4.86 µg/L 4.9% of the EPA limit 100 µg/L | 16/27 | SYR4 | 2013–2019 |
| Cyanide | 184 µg/L 92% of the EPA limit 200 µg/L | 15/26 | SYR4 | 2014–2019 |
| Xylenes, Total | 108 µg/L 1.1% of the EPA limit 10000 µg/L | 15/50 | SYR4 | 2012–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 14/27 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Nitrate-Nitrite | 368 µg/L 3.7% of the EPA limit 10000 µg/L | 10/11 | SYR4 | 2012–2019 |
| Ethylbenzene | 18.8 µg/L 2.7% of the EPA limit 700 µg/L | 9/50 | SYR4 | 2012–2019 |
| Atrazine | 0.2200 µg/L 7.3% of the EPA limit 3 µg/L | 8/54 | SYR4 | 2012–2019 |
| Simazine | 0.2000 µg/L 5% of the EPA limit 4 µg/L | 7/54 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 2.4 µg/L 40% of the EPA limit 6 µg/L | 6/54 | SYR4 | 2012–2019 |
| 2,4-D | 0.6340 µg/L 0.9% of the EPA limit 70 µg/L | 3/29 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 2.78 pCi/L 56% of the EPA limit 5 pCi/L | 3/3 | SYR4 | 2015–2017 |
| Gross Beta Particle Activity | 6.4 pCi/L No EPA limit set | 3/8 | SYR4 | 2014–2017 |
| Nitrite | 69.5 µg/L 7% of the EPA limit 1000 µg/L | 2/13 | SYR4 | 2012–2019 |
| Antimony, Total | 0.2000 µg/L 3.3% of the EPA limit 6 µg/L | 1/27 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 3 pCi/L 20% of the EPA limit 15 pCi/L | 1/8 | SYR4 | 2014–2017 |
| Mercury | 0.2230 µg/L 11% of the EPA limit 2 µg/L | 1/27 | SYR4 | 2013–2019 |
| Selenium | 3.09 µg/L 6.2% of the EPA limit 50 µg/L | 1/27 | SYR4 | 2013–2019 |
| Toluene | 1.02 µg/L 0.1% of the EPA limit 1000 µg/L | 1/50 | SYR4 | 2012–2019 |
73 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMethoxychlorNetfosaaNfdhaNmefosaaOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramStyreneTetrachloroethyleneThallium, TotalToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about City of Cleburne
Is City of Cleburne tap water safe to drink?
EPA monitoring detected 36 contaminants in City of Cleburne's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Cleburne's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does City of Cleburne serve?
City of Cleburne reports serving 34,075 people in Texas, per its EPA record.
Has City of Cleburne had any water quality violations?
The EPA has 15 violations on file for City of Cleburne, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.