Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2004-12-01 → 2004-12-31 |
| MCL | Health-based | Resolved | 2004-12-01 → 2004-12-31 |
| MCL | Health-based | Resolved | 2004-12-01 → 2004-12-31 |
| MCL | Health-based | Resolved | 2004-12-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2025-12-30 |
| MR | Monitoring | Resolved | 2025-12-30 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1400 µg/L 108% of the EPA limit, at the 95th percentile of samples — 1300 µg/L
worst single sample: 2520 µg/L | 197/200 | SYR4 | 2012–2019 |
| Lead | 3.7675 µg/L 25% of the EPA limit 15 µg/L
worst single sample: 10.5 µg/L | 116/199 | SYR4 | 2012–2019 |
| Bromodichloromethane | 22.47 µg/L No EPA limit set
worst single sample: 36.2 µg/L | 62/62 | SYR4 | 2012–2019 |
| Chloroform | 17.855 µg/L No EPA limit set
worst single sample: 52.4 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 14.07 µg/L No EPA limit set
worst single sample: 21.4 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 14.885 µg/L No EPA limit set
worst single sample: 27.5 µg/L | 62/62 | SYR4 | 2012–2019 |
| TTHM | 52.35 µg/L 65% of the EPA limit 80 µg/L
worst single sample: 113.1 µg/L | 62/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 31.02 µg/L 52% of the EPA limit 60 µg/L
worst single sample: 52.3 µg/L | 62/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 7.48 µg/L No EPA limit set
worst single sample: 18.7 µg/L | 62/62 | SYR4 | 2012–2019 |
| Bromoform | 5.515 µg/L No EPA limit set
worst single sample: 6.5 µg/L | 46/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 9.4 µg/L No EPA limit set
worst single sample: 12.2 µg/L | 46/62 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 2.485 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 22/62 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.71 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 22/62 | SYR4 | 2012–2019 |
| Lead | 0.0018 mg/L 12% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2025 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about B H P Wsc
Is B H P Wsc tap water safe to drink?
EPA monitoring detected 18 contaminants in B H P Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in B H P Wsc's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does B H P Wsc serve?
B H P Wsc reports serving 6,321 people in Texas, per its EPA record.
Has B H P Wsc had any water quality violations?
The EPA has 60 violations on file for B H P Wsc, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.