Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2014-10-01 → 2014-10-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-10-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-10-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-10-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-10-31 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2003-07-01 → 2003-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 24.16 µg/L No EPA limit set
worst single sample: 27.8 µg/L | 27/27 | SYR4 | 2012–2019 |
| Chloroform | 29.85 µg/L No EPA limit set
worst single sample: 61.2 µg/L | 27/27 | SYR4 | 2012–2019 |
| Dibromochloromethane | 14.23 µg/L No EPA limit set
worst single sample: 14.6 µg/L | 27/27 | SYR4 | 2012–2019 |
| TTHM | 59.92 µg/L 75% of the EPA limit 80 µg/L
worst single sample: 105 µg/L | 27/27 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 35.09 µg/L 58% of the EPA limit 60 µg/L
worst single sample: 70 µg/L | 27/27 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 11.93 µg/L No EPA limit set
worst single sample: 17.7 µg/L | 27/27 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 19.98 µg/L No EPA limit set
worst single sample: 35.6 µg/L | 25/27 | SYR4 | 2012–2019 |
| Bromoform | 4.908 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 17/27 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 8.225 µg/L No EPA limit set
worst single sample: 10.7 µg/L | 16/27 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.7 µg/L No EPA limit set
worst single sample: 6.7 µg/L | 11/27 | SYR4 | 2012–2019 |
| Copper | 832.6 µg/L 64% of the EPA limit 1300 µg/L
worst single sample: 874 µg/L | 10/10 | SYR4 | 2017 |
| Lead | 7.9295 µg/L 53% of the EPA limit 15 µg/L
worst single sample: 9.14 µg/L | 10/10 | SYR4 | 2017 |
| Lead | 0.0016 mg/L 10% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2026 |
| Monobromoacetic Acid | 2.2 µg/L No EPA limit set | 5/27 | SYR4 | 2012–2019 |
Utility contact
Frequently asked questions about City of Quinlan
Is City of Quinlan tap water safe to drink?
EPA monitoring detected 14 contaminants in City of Quinlan's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Quinlan's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does City of Quinlan serve?
City of Quinlan reports serving 1,414 people in Texas, per its EPA record.
Has City of Quinlan had any water quality violations?
The EPA has 35 violations on file for City of Quinlan, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.