Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 427 µg/L 33% of the EPA limit 1300 µg/L
worst single sample: 470 µg/L | 22/22 | SYR4 | 2012–2017 |
| Nitrate | 100 µg/L 1% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.056 µg/L No EPA limit set
worst single sample: 5.29 µg/L | 13/13 | SYR4 | 2012–2019 |
| Dibromochloromethane | 9.084 µg/L No EPA limit set
worst single sample: 10.5 µg/L | 13/13 | SYR4 | 2012–2019 |
| Bromoform | 12.005 µg/L No EPA limit set
worst single sample: 14.7 µg/L | 12/13 | SYR4 | 2012–2019 |
| Lead | 2.18 µg/L 15% of the EPA limit 15 µg/L
worst single sample: 2.3 µg/L | 7/22 | SYR4 | 2012–2017 |
| TTHM | 23.95 µg/L 30% of the EPA limit 80 µg/L
worst single sample: 24.7 µg/L | 7/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 4.19 µg/L 7% of the EPA limit 60 µg/L
worst single sample: 4.4 µg/L | 7/7 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.525 µg/L No EPA limit set
worst single sample: 3.7 µg/L | 6/7 | SYR4 | 2013–2019 |
| Barium | 52.84 µg/L 2.6% of the EPA limit 2000 µg/L
worst single sample: 53 µg/L | 3/3 | SYR4 | 2012–2019 |
| Chloroform | 10.406 µg/L No EPA limit set
worst single sample: 11.4 µg/L | 3/13 | SYR4 | 2012–2019 |
| Fluoride | 192.2 µg/L 4.8% of the EPA limit 4000 µg/L
worst single sample: 200 µg/L | 3/3 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 49.15 µg/L 0.5% of the EPA limit 10000 µg/L
worst single sample: 49.5 µg/L | 3/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.475 pCi/L 30% of the EPA limit 5 pCi/L
worst single sample: 1.5 pCi/L | 2/2 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 1 µg/L No EPA limit set | 2/7 | SYR4 | 2013–2019 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 2/2 | LCR | 2023 |
| Thallium, Total | 1.727 µg/L 86% of the EPA limit 2 µg/L
worst single sample: 1.8 µg/L | 2/3 | SYR4 | 2012–2019 |
| Lithium | 14.2 µg/L No EPA limit set | 2/2 | UCMR-5 | 2025 |
| Arsenic | 0.8080 µg/L 8.1% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2019 |
| Chromium | 4.63 µg/L 4.6% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Selenium | 3.91 µg/L 7.8% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2019 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Bethel Ash Wsc Lowe Plant
Is Bethel Ash Wsc Lowe Plant tap water safe to drink?
EPA monitoring detected 23 contaminants in Bethel Ash Wsc Lowe Plant's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bethel Ash Wsc Lowe Plant's water?
EPA monitoring detected Copper, Nitrate, Bromodichloromethane, Dibromochloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Bethel Ash Wsc Lowe Plant serve?
Bethel Ash Wsc Lowe Plant reports serving 786 people in Texas, per its EPA record.
Has Bethel Ash Wsc Lowe Plant had any water quality violations?
The EPA has no formal drinking-water violations on file for Bethel Ash Wsc Lowe Plant.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.