Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Archived | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Archived | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2004-07-01 → 2004-09-30 |
| MCL | Health-based | Resolved | 2004-07-01 → 2004-09-30 |
| MCL | Health-based | Resolved | 2004-07-01 → 2004-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 39 µg/L 3% of the EPA limit 1300 µg/L
worst single sample: 54 µg/L | 16/23 | SYR4 | 2012–2017 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2023 |
| Total Haloacetic Acids (HAA5) | 4.02 µg/L 6.7% of the EPA limit 60 µg/L
worst single sample: 4.3 µg/L | 5/14 | SYR4 | 2012–2019 |
| Barium | 32.115 µg/L 1.6% of the EPA limit 2000 µg/L
worst single sample: 33.9 µg/L | 4/4 | SYR4 | 2012–2019 |
| Fluoride | 120.125 µg/L 3% of the EPA limit 4000 µg/L
worst single sample: 125 µg/L | 4/4 | SYR4 | 2012–2019 |
| Lead | 14.87 µg/L 99% of the EPA limit 15 µg/L
worst single sample: 17 µg/L | 4/23 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 1.36 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 3/14 | SYR4 | 2012–2019 |
| Cyanide | 53.485 µg/L 27% of the EPA limit 200 µg/L
worst single sample: 53.8 µg/L | 2/2 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 2.88 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 2/14 | SYR4 | 2012–2019 |
| Bromodichloromethane | 28.86 µg/L No EPA limit set | 1/22 | SYR4 | 2012–2019 |
| Chloroform | 174.3 µg/L No EPA limit set | 1/22 | SYR4 | 2012–2019 |
| Chromium | 1.21 µg/L 1.2% of the EPA limit 100 µg/L | 1/4 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 2.1 pCi/L 42% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2013 |
| Dibromochloromethane | 8.92 µg/L No EPA limit set | 1/22 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.3 µg/L No EPA limit set | 1/14 | SYR4 | 2012–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Payne Springs Wsc
Is Payne Springs Wsc tap water safe to drink?
EPA monitoring detected 15 contaminants in Payne Springs Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Payne Springs Wsc's water?
EPA monitoring detected Copper, Lead, Total Haloacetic Acids (HAA5), Barium, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Payne Springs Wsc serve?
Payne Springs Wsc reports serving 1,449 people in Texas, per its EPA record.
Has Payne Springs Wsc had any water quality violations?
The EPA has 17 violations on file for Payne Springs Wsc, of which 10 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.