Compliance record
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 14.4 µg/L No EPA limit set | 69/69 | SYR4 | 2012–2019 |
| Chloroform | 39 µg/L No EPA limit set | 69/69 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.2 µg/L No EPA limit set | 65/69 | SYR4 | 2012–2019 |
| TTHM | 61.1 µg/L 76% of the EPA limit 80 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 39.7 µg/L No EPA limit set | 61/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 56.5 µg/L 94% of the EPA limit 60 µg/L | 61/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 13.7 µg/L No EPA limit set | 61/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.4 µg/L No EPA limit set | 55/62 | SYR4 | 2012–2019 |
| Nitrate | 1010 µg/L 10% of the EPA limit 10000 µg/L | 38/38 | SYR4 | 2012–2019 |
| Copper | 1200 µg/L 92% of the EPA limit 1300 µg/L | 36/42 | SYR4 | 2012–2017 |
| Lead | 6 µg/L 40% of the EPA limit 15 µg/L | 15/42 | SYR4 | 2012–2017 |
| Monochloroacetic Acid | 14.7 µg/L No EPA limit set | 10/62 | SYR4 | 2012–2019 |
| Bromoform | 1.5 µg/L No EPA limit set | 8/69 | SYR4 | 2012–2019 |
| Atrazine | 0.3200 µg/L 11% of the EPA limit 3 µg/L | 7/8 | SYR4 | 2012–2019 |
| Lead | 0.0042 mg/L 28% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2023 |
| Simazine | 0.1700 µg/L 4.3% of the EPA limit 4 µg/L | 5/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 790 µg/L 7.9% of the EPA limit 10000 µg/L | 4/4 | SYR4 | 2012–2017 |
| Barium | 92 µg/L 4.6% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2019 |
| Fluoride | 490 µg/L 12% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Cyanide | 90 µg/L 45% of the EPA limit 200 µg/L | 2/2 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Combined Uranium | 1.2 µg/L 4% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2015 |
| Gross Beta Particle Activity | 4.1 pCi/L No EPA limit set | 1/1 | SYR4 | 2015 |
| Selenium | 3.2 µg/L 6.4% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2019 |
| Toluene | 5.8 µg/L 0.6% of the EPA limit 1000 µg/L | 1/7 | SYR4 | 2012–2019 |
81 contaminants tested, none detected
Utility contact
Frequently asked questions about Harris County Mud 276
Is Harris County Mud 276 tap water safe to drink?
EPA monitoring detected 28 contaminants in Harris County Mud 276's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Harris County Mud 276's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Harris County Mud 276 serve?
Harris County Mud 276 reports serving 5,094 people in Texas, per its EPA record.
Has Harris County Mud 276 had any water quality violations?
The EPA has no formal drinking-water violations on file for Harris County Mud 276.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.