Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2013-12-30 |
| MR | Monitoring | Resolved | 2011-10-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 12.9 µg/L No EPA limit set | 67/67 | SYR4 | 2012–2019 |
| Chloroform | 55.1 µg/L No EPA limit set | 67/67 | SYR4 | 2012–2019 |
| TTHM | 63.9 µg/L 80% of the EPA limit 80 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 49.5 µg/L No EPA limit set | 61/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 70.9 µg/L 118% of the EPA limit, in the worst sample — 60 µg/L | 61/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 23.1 µg/L No EPA limit set | 61/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.7 µg/L No EPA limit set | 59/67 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.3 µg/L No EPA limit set | 47/62 | SYR4 | 2012–2019 |
| Copper | 614 µg/L 47% of the EPA limit 1300 µg/L | 43/61 | SYR4 | 2013–2017 |
| Cyanide | 150 µg/L 75% of the EPA limit 200 µg/L | 18/24 | SYR4 | 2014–2019 |
| Lead | 11 µg/L 73% of the EPA limit 15 µg/L | 17/61 | SYR4 | 2013–2017 |
| Nitrate | 800 µg/L 8% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0037 mg/L 25% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Monochloroacetic Acid | 13 µg/L No EPA limit set | 9/62 | SYR4 | 2012–2019 |
| Atrazine | 0.2700 µg/L 9% of the EPA limit 3 µg/L | 7/8 | SYR4 | 2012–2019 |
| Simazine | 0.1500 µg/L 3.8% of the EPA limit 4 µg/L | 5/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 690 µg/L 6.9% of the EPA limit 10000 µg/L | 3/3 | SYR4 | 2012–2015 |
| Barium | 60.7 µg/L 3% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2016–2019 |
| Fluoride | 470 µg/L 12% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Bromoform | 1 µg/L No EPA limit set | 1/67 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1 pCi/L 20% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Gross Beta Particle Activity | 6 pCi/L No EPA limit set | 1/1 | SYR4 | 2014 |
| Nitrite | 10 µg/L 1% of the EPA limit 1000 µg/L | 1/3 | SYR4 | 2012–2015 |
83 contaminants tested, none detected
Utility contact
Frequently asked questions about Harris County Mud 188
Is Harris County Mud 188 tap water safe to drink?
EPA monitoring detected 26 contaminants in Harris County Mud 188's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Harris County Mud 188's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Harris County Mud 188 serve?
Harris County Mud 188 reports serving 9,453 people in Texas, per its EPA record.
Has Harris County Mud 188 had any water quality violations?
The EPA has 2 violations on file for Harris County Mud 188, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.