Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2025-12-30 |
| MR | Monitoring | Resolved | 2025-12-30 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfpea | 0.0037 µg/L | 1/4 | 2023 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 243 µg/L 19% of the EPA limit 1300 µg/L | 41/42 | SYR4 | 2014–2017 |
| Lead | 3 µg/L 20% of the EPA limit 15 µg/L | 22/42 | SYR4 | 2014–2017 |
| Nitrate | 170 µg/L 1.7% of the EPA limit 10000 µg/L | 16/22 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Dibromochloromethane | 19 µg/L No EPA limit set | 12/20 | SYR4 | 2012–2019 |
| Bromodichloromethane | 9.1 µg/L No EPA limit set | 11/20 | SYR4 | 2012–2019 |
| Bromoform | 36 µg/L No EPA limit set | 11/20 | SYR4 | 2012–2019 |
| Barium | 220 µg/L 11% of the EPA limit 2000 µg/L | 4/4 | SYR4 | 2016–2019 |
| Chloroform | 3 µg/L No EPA limit set | 4/20 | SYR4 | 2012–2019 |
| Xylenes, Total | 1.4 µg/L 0% of the EPA limit 10000 µg/L | 4/13 | SYR4 | 2012–2019 |
| Fluoride | 2550 µg/L 64% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2014–2019 |
| Arsenic | 2.7 µg/L 27% of the EPA limit 10 µg/L | 2/4 | SYR4 | 2016–2019 |
| Dibromoacetic Acid | 3.5 µg/L No EPA limit set | 2/7 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 20 µg/L 0.2% of the EPA limit 10000 µg/L | 2/3 | SYR4 | 2012–2015 |
| Selenium | 3.5 µg/L 7% of the EPA limit 50 µg/L | 2/4 | SYR4 | 2016–2019 |
| TTHM | 34.7 µg/L 43% of the EPA limit 80 µg/L | 2/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 3.5 µg/L 5.8% of the EPA limit 60 µg/L | 2/7 | SYR4 | 2013–2019 |
| Lithium | 37.8 µg/L No EPA limit set | 2/4 | UCMR-5 | 2023 |
| Combined Uranium | 3.6 µg/L 12% of the EPA limit 30 µg/L | 1/3 | SYR4 | 2016–2019 |
| Di(2-ethylhexyl) Phthalate | 2.4 µg/L 40% of the EPA limit 6 µg/L | 1/6 | SYR4 | 2015–2018 |
| Gross Alpha, Excl. Radon And U | 4 pCi/L 27% of the EPA limit 15 pCi/L | 1/3 | SYR4 | 2016–2019 |
87 contaminants tested, none detected
Utility contact
Frequently asked questions about Mills Road Mud
Is Mills Road Mud tap water safe to drink?
EPA monitoring detected 22 contaminants in Mills Road Mud's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mills Road Mud's water?
EPA monitoring detected Copper, Lead, Nitrate, Lead, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Mills Road Mud serve?
Mills Road Mud reports serving 6,717 people in Texas, per its EPA record.
Has Mills Road Mud had any water quality violations?
The EPA has 2 violations on file for Mills Road Mud, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.