Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2022-07-01 |
| MR | Monitoring | Resolved | 2022-07-01 |
| MR | Monitoring | Resolved | 2022-07-01 |
| MR | Monitoring | Resolved | 2022-07-01 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-06-30 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-06-30 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-06-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 312.1 µg/L 24% of the EPA limit 1300 µg/L | 42/44 | SYR4 | 2014–2017 |
| Lead | 12.3 µg/L 82% of the EPA limit 15 µg/L | 21/44 | SYR4 | 2014–2017 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2023 |
| Bromodichloromethane | 3.7 µg/L No EPA limit set | 16/17 | SYR4 | 2012–2019 |
| Chloroform | 26.1 µg/L No EPA limit set | 16/17 | SYR4 | 2012–2019 |
| Nitrate | 980 µg/L 9.8% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 28.7 µg/L No EPA limit set | 7/7 | SYR4 | 2013–2019 |
| TTHM | 28.8 µg/L 36% of the EPA limit 80 µg/L | 7/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 37.4 µg/L 62% of the EPA limit 60 µg/L | 7/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 5.2 µg/L No EPA limit set | 7/7 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3.5 µg/L No EPA limit set | 4/7 | SYR4 | 2013–2019 |
| Arsenic | 3 µg/L 30% of the EPA limit 10 µg/L | 3/24 | SYR4 | 2012–2017 |
| Dibromochloromethane | 1 µg/L No EPA limit set | 3/17 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1060 µg/L 11% of the EPA limit 10000 µg/L | 3/3 | SYR4 | 2012–2015 |
| Nitrite | 80 µg/L 8% of the EPA limit 1000 µg/L | 3/3 | SYR4 | 2012–2015 |
| Barium | 159 µg/L 8% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Atrazine | 0.7200 µg/L 24% of the EPA limit 3 µg/L | 1/2 | SYR4 | 2015–2018 |
| Cyanide | 120 µg/L 60% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2014–2017 |
| Fluoride | 170 µg/L 4.3% of the EPA limit 4000 µg/L | 1/2 | SYR4 | 2014–2017 |
| Xylenes, Total | 0.8000 µg/L 0% of the EPA limit 10000 µg/L | 1/10 | SYR4 | 2012–2019 |
84 contaminants tested, none detected
Utility contact
Frequently asked questions about Harris County Wcid 116
Is Harris County Wcid 116 tap water safe to drink?
EPA monitoring detected 24 contaminants in Harris County Wcid 116's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Harris County Wcid 116's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Harris County Wcid 116 serve?
Harris County Wcid 116 reports serving 3,627 people in Texas, per its EPA record.
Has Harris County Wcid 116 had any water quality violations?
The EPA has 20 violations on file for Harris County Wcid 116, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.