Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2005-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 → 1993-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 287 µg/L 22% of the EPA limit 1300 µg/L | 150/165 | SYR4 | 2013–2019 |
| Lead | 91.1 µg/L 607% of the EPA limit, in the worst sample — 15 µg/L | 110/165 | SYR4 | 2013–2019 |
| Chloroform | 26.2 µg/L No EPA limit set | 63/70 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 23.7 µg/L 39% of the EPA limit 60 µg/L | 59/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 21.3 µg/L No EPA limit set | 58/62 | SYR4 | 2012–2019 |
| TTHM | 28.8 µg/L 36% of the EPA limit 80 µg/L | 58/62 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5 µg/L No EPA limit set | 53/70 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.5 µg/L No EPA limit set | 50/62 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2025 |
| Dibromoacetic Acid | 2.1 µg/L No EPA limit set | 19/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.8 µg/L No EPA limit set | 14/70 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.6 µg/L No EPA limit set | 14/62 | SYR4 | 2012–2019 |
| Nitrate | 670 µg/L 6.7% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Bromoform | 2.2 µg/L No EPA limit set | 9/70 | SYR4 | 2012–2019 |
| Lithium | 33.6 µg/L No EPA limit set | 4/4 | UCMR-5 | 2023 |
| Nitrate-Nitrite | 690 µg/L 6.9% of the EPA limit 10000 µg/L | 3/3 | SYR4 | 2012–2015 |
| Barium | 209 µg/L 10% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 550 µg/L 14% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Nitrite | 20 µg/L 2% of the EPA limit 1000 µg/L | 2/3 | SYR4 | 2012–2015 |
| Atrazine | 0.1700 µg/L 5.7% of the EPA limit 3 µg/L | 1/3 | SYR4 | 2012–2018 |
| Cyanide | 60 µg/L 30% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 4 pCi/L No EPA limit set | 1/1 | SYR4 | 2016 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Westador Mud
Is Westador Mud tap water safe to drink?
EPA monitoring detected 22 contaminants in Westador Mud's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Westador Mud's water?
EPA monitoring detected Copper, Lead, Chloroform, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Westador Mud serve?
Westador Mud reports serving 5,337 people in Texas, per its EPA record.
Has Westador Mud had any water quality violations?
The EPA has 2 violations on file for Westador Mud, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.