Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-04-01 → 2005-06-30 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-01-01 → 2005-03-31 |
| MR | Monitoring | Resolved | 2016-12-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 398 µg/L 31% of the EPA limit 1300 µg/L
worst single sample: 590 µg/L | 65/66 | SYR4 | 2013–2019 |
| Nitrate | 366.25 µg/L 3.7% of the EPA limit 10000 µg/L
worst single sample: 400 µg/L | 64/64 | SYR4 | 2012–2019 |
| Lead | 13.75 µg/L 92% of the EPA limit 15 µg/L
worst single sample: 54 µg/L | 40/66 | SYR4 | 2013–2019 |
| Chloroform | 13.1535 µg/L No EPA limit set
worst single sample: 22 µg/L | 32/37 | SYR4 | 2012–2019 |
| Bromodichloromethane | 15.78 µg/L No EPA limit set
worst single sample: 21.1 µg/L | 20/37 | SYR4 | 2012–2019 |
| Dibromochloromethane | 16.8225 µg/L No EPA limit set
worst single sample: 18 µg/L | 16/37 | SYR4 | 2012–2019 |
| Lead | 0.0031 mg/L 21% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Nitrate-Nitrite | 413.5 µg/L 4.1% of the EPA limit 10000 µg/L
worst single sample: 430 µg/L | 12/12 | SYR4 | 2012–2015 |
| Barium | 27 µg/L 1.4% of the EPA limit 2000 µg/L | 10/10 | SYR4 | 2016–2019 |
| Dichloroacetic Acid | 10.9 µg/L No EPA limit set
worst single sample: 13.6 µg/L | 10/10 | SYR4 | 2012–2019 |
| TTHM | 41.05 µg/L 51% of the EPA limit 80 µg/L
worst single sample: 65.8 µg/L | 10/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 21.325 µg/L 36% of the EPA limit 60 µg/L
worst single sample: 29.2 µg/L | 10/10 | SYR4 | 2012–2019 |
| Bromoform | 5.0395 µg/L No EPA limit set
worst single sample: 5.26 µg/L | 8/37 | SYR4 | 2012–2019 |
| Fluoride | 796.75 µg/L 20% of the EPA limit 4000 µg/L
worst single sample: 816 µg/L | 8/8 | SYR4 | 2014–2017 |
| Chromium | 4.11 µg/L 4.1% of the EPA limit 100 µg/L
worst single sample: 4.2 µg/L | 7/10 | SYR4 | 2016–2019 |
| Trichloroacetic Acid | 7.98 µg/L No EPA limit set
worst single sample: 9.5 µg/L | 5/10 | SYR4 | 2012–2019 |
| Nitrite | 161.6 µg/L 16% of the EPA limit 1000 µg/L
worst single sample: 170 µg/L | 4/12 | SYR4 | 2012–2015 |
| Lithium | 23.3 µg/L No EPA limit set | 4/4 | UCMR-5 | 2025 |
| Monochloroacetic Acid | 2.49 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 3/10 | SYR4 | 2012–2019 |
| Cyanide | 39.035 µg/L 20% of the EPA limit 200 µg/L
worst single sample: 39.7 µg/L | 2/8 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 5.905 µg/L No EPA limit set
worst single sample: 6.1 µg/L | 2/10 | SYR4 | 2012–2019 |
| Antimony, Total | 0.2400 µg/L 4% of the EPA limit 6 µg/L | 1/10 | SYR4 | 2016–2019 |
| Arsenic | 1.2 µg/L 12% of the EPA limit 10 µg/L | 1/10 | SYR4 | 2016–2019 |
| Di(2-ethylhexyl) Phthalate | 0.5000 µg/L 8.3% of the EPA limit 6 µg/L | 1/22 | SYR4 | 2012–2019 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Liberty City Wsc
Is Liberty City Wsc tap water safe to drink?
EPA monitoring detected 24 contaminants in Liberty City Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Liberty City Wsc's water?
EPA monitoring detected Copper, Nitrate, Lead, Chloroform, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Liberty City Wsc serve?
Liberty City Wsc reports serving 6,540 people in Texas, per its EPA record.
Has Liberty City Wsc had any water quality violations?
The EPA has 13 violations on file for Liberty City Wsc, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.