Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| Other | Monitoring | Unaddressed | 2026-04-02 |
| MR | Monitoring | Resolved | 2025-11-06 |
| MR | Monitoring | Resolved | 2025-11-06 |
| MR | Monitoring | Resolved | 2025-11-06 |
| MR | Monitoring | Resolved | 2025-11-06 |
| MR | Monitoring | Resolved | 2025-08-05 |
| MR | Monitoring | Resolved | 2025-08-05 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 140 µg/L 11% of the EPA limit 1300 µg/L | 32/42 | SYR4 | 2013–2018 |
| Lead | 15 µg/L 100% of the EPA limit 15 µg/L | 13/42 | SYR4 | 2013–2018 |
| Nitrate | 20 µg/L 0.2% of the EPA limit 10000 µg/L | 8/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.6 µg/L No EPA limit set | 4/7 | SYR4 | 2015–2019 |
| Bromoform | 6.7 µg/L No EPA limit set | 4/7 | SYR4 | 2015–2019 |
| Chloroform | 2.8 µg/L No EPA limit set | 4/7 | SYR4 | 2015–2019 |
| Dibromochloromethane | 8.4 µg/L No EPA limit set | 4/7 | SYR4 | 2015–2019 |
| Barium | 215 µg/L 11% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Fluoride | 540 µg/L 14% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 10 µg/L 0.1% of the EPA limit 10000 µg/L | 2/3 | SYR4 | 2012–2015 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Dibromoacetic Acid | 2 µg/L No EPA limit set | 1/2 | SYR4 | 2016–2019 |
| Dichloroacetic Acid | 1.2 µg/L No EPA limit set | 1/2 | SYR4 | 2016–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 1/1 | LCR | 2024 |
| TTHM | 12.7 µg/L 16% of the EPA limit 80 µg/L | 1/2 | SYR4 | 2016–2019 |
| Total Haloacetic Acids (HAA5) | 3.2 µg/L 5.3% of the EPA limit 60 µg/L | 1/2 | SYR4 | 2016–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about K & B Waterworks
Is K & B Waterworks tap water safe to drink?
EPA monitoring detected 16 contaminants in K & B Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in K & B Waterworks's water?
EPA monitoring detected Copper, Lead, Nitrate, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does K & B Waterworks serve?
K & B Waterworks reports serving 81 people in Texas, per its EPA record.
Has K & B Waterworks had any water quality violations?
The EPA has 383 violations on file for K & B Waterworks, of which 3 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.