Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2021-01-01 |
| MON | Monitoring | Resolved | 2019-12-01 → 2019-12-31 |
| MON | Monitoring | Resolved | 2019-12-01 → 2019-12-31 |
| MON | Monitoring | Resolved | 2019-12-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2016-12-30 |
| MR | Monitoring | Resolved | 2016-12-30 |
| MR | Monitoring | Resolved | 2013-09-29 |
| MR | Monitoring | Resolved | 2012-07-01 |
| MR | Monitoring | Resolved | 2012-07-01 |
| MR | Monitoring | Resolved | 2012-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 166 µg/L 13% of the EPA limit 1300 µg/L | 80/81 | SYR4 | 2012–2019 |
| Lead | 4.32 µg/L 29% of the EPA limit 15 µg/L | 41/81 | SYR4 | 2012–2019 |
| Chloroform | 27.8 µg/L No EPA limit set | 14/14 | SYR4 | 2012–2019 |
| Bromodichloromethane | 11.1 µg/L No EPA limit set | 13/14 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 38.7 µg/L No EPA limit set | 13/13 | SYR4 | 2012–2019 |
| TTHM | 36.8 µg/L 46% of the EPA limit 80 µg/L | 13/13 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 55.5 µg/L 93% of the EPA limit 60 µg/L | 13/13 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.9 µg/L No EPA limit set | 9/14 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 13.1 µg/L No EPA limit set | 9/13 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.1 µg/L No EPA limit set | 7/13 | SYR4 | 2012–2019 |
| Lead | 0.0019 mg/L 12% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2023 |
| Monochloroacetic Acid | 4.4 µg/L No EPA limit set | 5/13 | SYR4 | 2012–2019 |
| Bromoform | 1.7 µg/L No EPA limit set | 2/14 | SYR4 | 2012–2019 |
| Lithium | 12.4 µg/L No EPA limit set | 2/2 | UCMR-5 | 2023 |
27 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 134c
Is Fort Bend County Mud 134c tap water safe to drink?
EPA monitoring detected 17 contaminants in Fort Bend County Mud 134c's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 134c's water?
EPA monitoring detected Copper, Lead, Chloroform, Bromodichloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 134c serve?
Fort Bend County Mud 134c reports serving 7,260 people in Texas, per its EPA record.
Has Fort Bend County Mud 134c had any water quality violations?
The EPA has 11 violations on file for Fort Bend County Mud 134c, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.