← Texas

Tap water quality report

Fort Bend County Mud 128

EPA monitoring tested this supplier for 14 contaminants and detected 14. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

14
contaminants tested
14
detected
10,974
people served
0
health-based violations
Water source
SWP
Ownership
Local government
Counties served
Fort Bend

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
11
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2014-10-01
MR Monitoring Resolved 2014-10-01
MR Monitoring Resolved 2014-10-01
MR Monitoring Resolved 2014-10-01
MR Monitoring Resolved 2013-10-01
MR Monitoring Resolved 2012-10-01
Other Monitoring Resolved 2010-10-10
Other Monitoring Resolved 2010-10-10
MR Monitoring Resolved 2010-06-01 → 2010-06-30
MR Monitoring Resolved 2010-06-01 → 2010-06-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
220 µg/L 17%
of the EPA limit 1300 µg/L
32/35 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
11.5 µg/L 19%
of the EPA limit 60 µg/L
17/23 SYR4 2012–2019
Lead
13 µg/L 87%
of the EPA limit 15 µg/L
15/35 SYR4 2012–2019
Dichloroacetic Acid
6.8 µg/L
No EPA limit set
14/23 SYR4 2012–2019
TTHM
10.6 µg/L 13%
of the EPA limit 80 µg/L
13/23 SYR4 2012–2019
Dibromoacetic Acid
8.5 µg/L
No EPA limit set
11/23 SYR4 2012–2019
Chloroform
7.3 µg/L
No EPA limit set
8/23 SYR4 2012–2019
Bromoform
1.9 µg/L
No EPA limit set
7/23 SYR4 2012–2019
Dibromochloromethane
1.7 µg/L
No EPA limit set
5/23 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
5/5 LCR 2025
Trichloroacetic Acid
1.8 µg/L
No EPA limit set
4/23 SYR4 2012–2019
Bromodichloromethane
1.9 µg/L
No EPA limit set
3/23 SYR4 2012–2019
Monochloroacetic Acid
4.6 µg/L
No EPA limit set
2/23 SYR4 2012–2019
Monobromoacetic Acid
2.9 µg/L
No EPA limit set
1/23 SYR4 2012–2019

Utility contact

Contact
CABIRO, MICHAEL
Phone
281-500-4686

Frequently asked questions about Fort Bend County Mud 128

Is Fort Bend County Mud 128 tap water safe to drink?

EPA monitoring detected 14 contaminants in Fort Bend County Mud 128's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Fort Bend County Mud 128's water?

EPA monitoring detected Copper, Total Haloacetic Acids (HAA5), Lead, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.

How many people does Fort Bend County Mud 128 serve?

Fort Bend County Mud 128 reports serving 10,974 people in Texas, per its EPA record.

Has Fort Bend County Mud 128 had any water quality violations?

The EPA has 11 violations on file for Fort Bend County Mud 128, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.