Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2025-11-01 → 2025-11-30 |
| MON | Monitoring | Resolved | 2025-11-01 → 2025-11-30 |
| MON | Monitoring | Resolved | 2025-11-01 → 2025-11-30 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2013-10-01 |
| MR | Monitoring | Resolved | 2013-01-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 209 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 820 µg/L | 38/45 | SYR4 | 2012–2018 |
| Bromodichloromethane | 18.28 µg/L No EPA limit set
worst single sample: 19.6 µg/L | 13/13 | SYR4 | 2012–2019 |
| Chloroform | 48.3 µg/L No EPA limit set
worst single sample: 49.8 µg/L | 13/13 | SYR4 | 2012–2019 |
| Dibromochloromethane | 18.26 µg/L No EPA limit set
worst single sample: 18.8 µg/L | 13/13 | SYR4 | 2012–2019 |
| TTHM | 71.58 µg/L 89% of the EPA limit 80 µg/L
worst single sample: 74.7 µg/L | 13/13 | SYR4 | 2012–2019 |
| Lead | 29.895 µg/L 199% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 56 µg/L | 11/45 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 31.52 µg/L 53% of the EPA limit 60 µg/L
worst single sample: 38.9 µg/L | 10/13 | SYR4 | 2012–2019 |
| Bromoform | 20.16 µg/L No EPA limit set
worst single sample: 20.6 µg/L | 9/13 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 16.26 µg/L No EPA limit set
worst single sample: 21.3 µg/L | 9/13 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 12.64 µg/L No EPA limit set
worst single sample: 13.6 µg/L | 9/13 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 7.95 µg/L No EPA limit set
worst single sample: 8.3 µg/L | 6/13 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2024 |
| Monochloroacetic Acid | 5.685 µg/L No EPA limit set
worst single sample: 5.7 µg/L | 4/13 | SYR4 | 2012–2019 |
| Lithium | 19.2 µg/L No EPA limit set | 2/2 | UCMR-5 | 2023 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about Sienna Mud 10
Is Sienna Mud 10 tap water safe to drink?
EPA monitoring detected 18 contaminants in Sienna Mud 10's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Sienna Mud 10's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Sienna Mud 10 serve?
Sienna Mud 10 reports serving 7,824 people in Texas, per its EPA record.
Has Sienna Mud 10 had any water quality violations?
The EPA has 9 violations on file for Sienna Mud 10, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.