Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2013-12-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 204 µg/L 16% of the EPA limit 1300 µg/L | 46/64 | SYR4 | 2013–2019 |
| Nitrate | 720 µg/L 7.2% of the EPA limit 10000 µg/L | 32/32 | SYR4 | 2012–2019 |
| Bromodichloromethane | 19.9 µg/L No EPA limit set | 19/19 | SYR4 | 2013–2019 |
| Chloroform | 26.8 µg/L No EPA limit set | 19/19 | SYR4 | 2013–2019 |
| Dibromochloromethane | 9.8 µg/L No EPA limit set | 19/19 | SYR4 | 2013–2019 |
| Atrazine | 0.2500 µg/L 8.3% of the EPA limit 3 µg/L | 9/11 | SYR4 | 2013–2019 |
| Lead | 7.86 µg/L 52% of the EPA limit 15 µg/L | 7/64 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 4.8 µg/L No EPA limit set | 6/6 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 31.6 µg/L No EPA limit set | 6/6 | SYR4 | 2014–2019 |
| TTHM | 57.7 µg/L 72% of the EPA limit 80 µg/L | 6/6 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 44 µg/L 73% of the EPA limit 60 µg/L | 6/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 10.2 µg/L No EPA limit set | 6/6 | SYR4 | 2014–2019 |
| Barium | 106 µg/L 5.3% of the EPA limit 2000 µg/L | 5/5 | SYR4 | 2013–2019 |
| Fluoride | 420 µg/L 11% of the EPA limit 4000 µg/L | 5/5 | SYR4 | 2013–2019 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2025 |
| Cyanide | 160 µg/L 80% of the EPA limit 200 µg/L | 4/5 | SYR4 | 2013–2019 |
| Combined Uranium | 1.8 µg/L 6% of the EPA limit 30 µg/L | 4/5 | SYR4 | 2013–2019 |
| Bromoform | 6.4 µg/L No EPA limit set | 3/19 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 6.1 pCi/L No EPA limit set | 3/5 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 530 µg/L 5.3% of the EPA limit 10000 µg/L | 3/3 | SYR4 | 2012–2015 |
| Simazine | 0.1000 µg/L 2.5% of the EPA limit 4 µg/L | 3/11 | SYR4 | 2013–2019 |
| Lithium | 9.7 µg/L No EPA limit set | 2/6 | UCMR-5 | 2025 |
| Combined Radium (-226 And -228) | 2.3 pCi/L 46% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Gross Alpha, Excl. Radon And U | 1 pCi/L 6.7% of the EPA limit 15 pCi/L | 1/5 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 5 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
82 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 146
Is Fort Bend County Mud 146 tap water safe to drink?
EPA monitoring detected 27 contaminants in Fort Bend County Mud 146's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 146's water?
EPA monitoring detected Copper, Nitrate, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 146 serve?
Fort Bend County Mud 146 reports serving 5,985 people in Texas, per its EPA record.
Has Fort Bend County Mud 146 had any water quality violations?
The EPA has 1 violation on file for Fort Bend County Mud 146, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.