Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2004-05-01 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 23.9 µg/L No EPA limit set | 48/48 | SYR4 | 2012–2019 |
| Chloroform | 33.9 µg/L No EPA limit set | 48/48 | SYR4 | 2012–2019 |
| Dibromochloromethane | 15.8 µg/L No EPA limit set | 48/48 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 33.5 µg/L No EPA limit set | 43/43 | SYR4 | 2012–2019 |
| TTHM | 68.4 µg/L 86% of the EPA limit 80 µg/L | 43/43 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 48.1 µg/L 80% of the EPA limit 60 µg/L | 43/43 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 12.9 µg/L No EPA limit set | 43/43 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 6.1 µg/L No EPA limit set | 42/43 | SYR4 | 2012–2019 |
| Copper | 512 µg/L 39% of the EPA limit 1300 µg/L | 38/42 | SYR4 | 2012–2019 |
| Bromoform | 5.1 µg/L No EPA limit set | 30/48 | SYR4 | 2012–2019 |
| Nitrate | 610 µg/L 6.1% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Atrazine | 0.6000 µg/L 20% of the EPA limit 3 µg/L | 7/8 | SYR4 | 2015–2019 |
| Simazine | 0.2200 µg/L 5.5% of the EPA limit 4 µg/L | 7/8 | SYR4 | 2015–2019 |
| Lead | 2.76 µg/L 18% of the EPA limit 15 µg/L | 6/42 | SYR4 | 2012–2019 |
| Lead | 0.00090 mg/L 6% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2025 |
| Lithium | 16.7 µg/L No EPA limit set | 4/4 | UCMR-5 | 2024 |
| Barium | 184 µg/L 9.2% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2019 |
| Fluoride | 370 µg/L 9.3% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 3.5 µg/L No EPA limit set | 3/43 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 540 µg/L 5.4% of the EPA limit 10000 µg/L | 2/2 | SYR4 | 2013–2014 |
| Arsenic | 2.6 µg/L 26% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Monobromoacetic Acid | 1.1 µg/L No EPA limit set | 1/43 | SYR4 | 2012–2019 |
81 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 122
Is Fort Bend County Mud 122 tap water safe to drink?
EPA monitoring detected 28 contaminants in Fort Bend County Mud 122's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 122's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 122 serve?
Fort Bend County Mud 122 reports serving 3,366 people in Texas, per its EPA record.
Has Fort Bend County Mud 122 had any water quality violations?
The EPA has 5 violations on file for Fort Bend County Mud 122, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.