Compliance record
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 799 µg/L 61% of the EPA limit 1300 µg/L | 57/62 | SYR4 | 2012–2019 |
| Lead | 56 µg/L 373% of the EPA limit, in the worst sample — 15 µg/L | 27/62 | SYR4 | 2012–2019 |
| Nitrate | 820 µg/L 8.2% of the EPA limit 10000 µg/L | 18/22 | SYR4 | 2012–2019 |
| Lead | 0.0042 mg/L 28% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Bromodichloromethane | 15 µg/L No EPA limit set | 10/12 | SYR4 | 2013–2019 |
| Chloroform | 29.1 µg/L No EPA limit set | 10/12 | SYR4 | 2013–2019 |
| Dibromochloromethane | 6.6 µg/L No EPA limit set | 10/12 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.3 µg/L No EPA limit set | 6/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 28.7 µg/L No EPA limit set | 6/7 | SYR4 | 2013–2019 |
| TTHM | 40.6 µg/L 51% of the EPA limit 80 µg/L | 6/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 41.7 µg/L 70% of the EPA limit 60 µg/L | 6/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 11.8 µg/L No EPA limit set | 6/7 | SYR4 | 2013–2019 |
| Bromoform | 1.8 µg/L No EPA limit set | 5/12 | SYR4 | 2013–2019 |
| Atrazine | 0.3300 µg/L 11% of the EPA limit 3 µg/L | 4/6 | SYR4 | 2015–2019 |
| Barium | 182 µg/L 9.1% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Fluoride | 310 µg/L 7.8% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Cyanide | 130 µg/L 65% of the EPA limit 200 µg/L | 2/2 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 280 µg/L 2.8% of the EPA limit 10000 µg/L | 2/3 | SYR4 | 2013–2019 |
| Simazine | 0.1000 µg/L 2.5% of the EPA limit 4 µg/L | 2/6 | SYR4 | 2015–2019 |
| Lithium | 10.5 µg/L No EPA limit set | 2/3 | UCMR-5 | 2025 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Combined Uranium | 1.6 µg/L 5.3% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2015 |
| Gross Beta Particle Activity | 4 pCi/L No EPA limit set | 1/1 | SYR4 | 2015 |
81 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 34
Is Fort Bend County Mud 34 tap water safe to drink?
EPA monitoring detected 28 contaminants in Fort Bend County Mud 34's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 34's water?
EPA monitoring detected Copper, Lead, Nitrate, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 34 serve?
Fort Bend County Mud 34 reports serving 5,367 people in Texas, per its EPA record.
Has Fort Bend County Mud 34 had any water quality violations?
The EPA has no formal drinking-water violations on file for Fort Bend County Mud 34.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.