Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2013-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 270 µg/L 21% of the EPA limit 1300 µg/L | 131/143 | SYR4 | 2012–2017 |
| Lead | 102 µg/L 680% of the EPA limit, in the worst sample — 15 µg/L | 94/143 | SYR4 | 2012–2017 |
| Chloroform | 33.4 µg/L No EPA limit set | 62/62 | SYR4 | 2013–2019 |
| Bromodichloromethane | 20.1 µg/L No EPA limit set | 61/62 | SYR4 | 2013–2019 |
| Dibromochloromethane | 11.6 µg/L No EPA limit set | 55/62 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 37 µg/L No EPA limit set | 51/51 | SYR4 | 2013–2019 |
| TTHM | 53.2 µg/L 67% of the EPA limit 80 µg/L | 51/51 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 51.5 µg/L 86% of the EPA limit 60 µg/L | 51/51 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 10.4 µg/L No EPA limit set | 50/51 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 4.6 µg/L No EPA limit set | 41/51 | SYR4 | 2013–2019 |
| Nitrate | 660 µg/L 6.6% of the EPA limit 10000 µg/L | 24/24 | SYR4 | 2012–2019 |
| Bromoform | 3.6 µg/L No EPA limit set | 15/62 | SYR4 | 2013–2019 |
| Lead | 0.00050 mg/L 3.3% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Atrazine | 0.3800 µg/L 13% of the EPA limit 3 µg/L | 12/15 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 7.6 µg/L No EPA limit set | 12/51 | SYR4 | 2013–2019 |
| Simazine | 0.1500 µg/L 3.8% of the EPA limit 4 µg/L | 8/15 | SYR4 | 2012–2019 |
| Barium | 81.8 µg/L 4.1% of the EPA limit 2000 µg/L | 5/5 | SYR4 | 2013–2019 |
| Fluoride | 390 µg/L 9.8% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2014–2019 |
| Gross Beta Particle Activity | 6.4 pCi/L No EPA limit set | 3/3 | SYR4 | 2014–2019 |
| Nitrate-Nitrite | 430 µg/L 4.3% of the EPA limit 10000 µg/L | 3/3 | SYR4 | 2012–2015 |
| Lithium | 22.5 µg/L No EPA limit set | 3/8 | UCMR-5 | 2024 |
| Combined Uranium | 1.7 µg/L 5.7% of the EPA limit 30 µg/L | 2/3 | SYR4 | 2014–2019 |
| Cyanide | 60 µg/L 30% of the EPA limit 200 µg/L | 1/4 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 2.2 pCi/L 44% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Di(2-ethylhexyl) Phthalate | 1.8 µg/L 30% of the EPA limit 6 µg/L | 1/15 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 1 pCi/L 6.7% of the EPA limit 15 pCi/L | 1/3 | SYR4 | 2014–2019 |
| Nitrite | 20 µg/L 2% of the EPA limit 1000 µg/L | 1/4 | SYR4 | 2012–2016 |
79 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 30
Is Fort Bend County Mud 30 tap water safe to drink?
EPA monitoring detected 30 contaminants in Fort Bend County Mud 30's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 30's water?
EPA monitoring detected Copper, Lead, Chloroform, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 30 serve?
Fort Bend County Mud 30 reports serving 16,794 people in Texas, per its EPA record.
Has Fort Bend County Mud 30 had any water quality violations?
The EPA has 1 violation on file for Fort Bend County Mud 30, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.