Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 1992-07-01 → 1993-06-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 16.6 µg/L No EPA limit set | 64/64 | SYR4 | 2012–2019 |
| Chloroform | 31.7 µg/L No EPA limit set | 64/64 | SYR4 | 2012–2019 |
| Dibromochloromethane | 10.9 µg/L No EPA limit set | 64/64 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 32.3 µg/L No EPA limit set | 62/62 | SYR4 | 2012–2019 |
| TTHM | 50.6 µg/L 63% of the EPA limit 80 µg/L | 62/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 50.7 µg/L 85% of the EPA limit 60 µg/L | 62/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 11.6 µg/L No EPA limit set | 61/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 7.9 µg/L No EPA limit set | 54/62 | SYR4 | 2012–2019 |
| Copper | 180 µg/L 14% of the EPA limit 1300 µg/L | 38/62 | SYR4 | 2013–2019 |
| Bromoform | 5.4 µg/L No EPA limit set | 20/64 | SYR4 | 2012–2019 |
| Lead | 25.6 µg/L 171% of the EPA limit, in the worst sample — 15 µg/L | 16/62 | SYR4 | 2013–2019 |
| Nitrate | 570 µg/L 5.7% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.00090 mg/L 6% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Atrazine | 0.3500 µg/L 12% of the EPA limit 3 µg/L | 8/11 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.8 µg/L No EPA limit set | 8/62 | SYR4 | 2012–2019 |
| Simazine | 0.1400 µg/L 3.5% of the EPA limit 4 µg/L | 8/11 | SYR4 | 2012–2019 |
| Barium | 90.6 µg/L 4.5% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2016–2019 |
| Nitrate-Nitrite | 510 µg/L 5.1% of the EPA limit 10000 µg/L | 3/3 | SYR4 | 2012–2015 |
| Fluoride | 380 µg/L 9.5% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Cyanide | 130 µg/L 65% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2014–2017 |
| Combined Uranium | 1.5 µg/L 5% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2017 |
| Gross Beta Particle Activity | 5.5 pCi/L No EPA limit set | 1/1 | SYR4 | 2017 |
| Lithium | 9.06 µg/L No EPA limit set | 1/3 | UCMR-5 | 2025 |
82 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 2
Is Fort Bend County Mud 2 tap water safe to drink?
EPA monitoring detected 26 contaminants in Fort Bend County Mud 2's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 2's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 2 serve?
Fort Bend County Mud 2 reports serving 6,819 people in Texas, per its EPA record.
Has Fort Bend County Mud 2 had any water quality violations?
The EPA has 1 violation on file for Fort Bend County Mud 2, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.