Tap WaterIndex

← Texas

Tap water quality report

City of Honey Grove

EPA monitoring tested this supplier for 79 contaminants and detected 22. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
22
detected
2,192
people served
3
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
Ground water
Ownership
Local government
Counties served
Fannin

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
7
violations on file
1
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 1984-12-18 → 1985-12-17
MCL Health-based Archived 1979-05-03 → 1980-05-02
MCL Health-based Archived 1979-05-03 → 1979-06-02
MR Monitoring Resolved 2025-12-30
MR Monitoring Resolved 2025-12-30
RPT Monitoring Unaddressed 2025-07-02
MR Monitoring Resolved 2010-07-01 → 2010-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
334 µg/L 26%
of the EPA limit 1300 µg/L
worst single sample: 550 µg/L
31/31 SYR4 2013–2019
Nitrate
89.2 µg/L 0.9%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Bromodichloromethane
3.8775 µg/L
No EPA limit set
worst single sample: 4.4 µg/L
12/12 SYR4 2012–2019
Bromoform
17.66 µg/L
No EPA limit set
worst single sample: 20.3 µg/L
12/12 SYR4 2012–2019
Dibromochloromethane
12.41 µg/L
No EPA limit set
worst single sample: 13.4 µg/L
12/12 SYR4 2012–2019
Lead
0.0022 mg/L 15%
of the EPA limit 0.0150 mg/L
 10/10 LCR 2025
Lead
3.014 µg/L 20%
of the EPA limit 15 µg/L
worst single sample: 3.77 µg/L
9/31 SYR4 2013–2019
Dibromoacetic Acid
3.8 µg/L
No EPA limit set
worst single sample: 4.1 µg/L
7/7 SYR4 2012–2019
TTHM
34.83 µg/L 44%
of the EPA limit 80 µg/L
worst single sample: 36.9 µg/L
7/7 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
19.21 µg/L 32%
of the EPA limit 60 µg/L
worst single sample: 21.1 µg/L
7/7 SYR4 2012–2019
Monochloroacetic Acid
14.44 µg/L
No EPA limit set
worst single sample: 15.1 µg/L
4/7 SYR4 2012–2019
Nitrate-Nitrite
75.9 µg/L 0.8%
of the EPA limit 10000 µg/L
worst single sample: 76 µg/L
3/3 SYR4 2012–2015
Barium
14.8 µg/L 0.7%
of the EPA limit 2000 µg/L
worst single sample: 15 µg/L
2/2 SYR4 2015–2018
Chloroform
1.385 µg/L
No EPA limit set
worst single sample: 1.4 µg/L
2/12 SYR4 2012–2019
Chromium
2.195 µg/L 2.2%
of the EPA limit 100 µg/L
worst single sample: 2.2 µg/L
2/2 SYR4 2015–2018
Dichloroacetic Acid
1.19 µg/L
No EPA limit set
worst single sample: 1.2 µg/L
2/7 SYR4 2012–2019
Fluoride
1609.5 µg/L 40%
of the EPA limit 4000 µg/L
worst single sample: 1610 µg/L
2/2 SYR4 2014–2017
Trichloroacetic Acid
1.95 µg/L
No EPA limit set
worst single sample: 2 µg/L
2/7 SYR4 2012–2019
Cyanide
20.6 µg/L 10%
of the EPA limit 200 µg/L
 1/2 SYR4 2014–2017
Combined Radium (-226 And -228)
1 pCi/L 20%
of the EPA limit 5 pCi/L
 1/1 SYR4 2012
Selenium
1.3 µg/L 2.6%
of the EPA limit 50 µg/L
 1/2 SYR4 2015–2018
Xylenes, Total
0.5600 µg/L 0%
of the EPA limit 10000 µg/L
 1/5 SYR4 2015–2019
57 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNitriteOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
CAFFEE, CLAUDE
Phone
903-378-3033

Frequently asked questions about City of Honey Grove

Is City of Honey Grove tap water safe to drink?

EPA monitoring detected 22 contaminants in City of Honey Grove's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in City of Honey Grove's water?

EPA monitoring detected Copper, Nitrate, Bromodichloromethane, Bromoform, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does City of Honey Grove serve?

City of Honey Grove reports serving 2,192 people in Texas, per its EPA record.

Has City of Honey Grove had any water quality violations?

The EPA has 7 violations on file for City of Honey Grove, of which 3 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.