Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2024-10-17 |
| TT | Health-based | Unaddressed | 2024-10-17 |
| TT | Health-based | Unaddressed | 2024-10-17 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2020-07-01 → 2020-09-30 |
| MCL | Health-based | Resolved | 2020-07-01 → 2020-09-30 |
| MCL | Health-based | Resolved | 2020-07-01 → 2020-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Arsenic | 29 µg/L 290% of the EPA limit, in the worst sample — 10 µg/L | 20/26 | SYR4 | 2012–2019 |
| Bromodichloromethane | 14.1 µg/L No EPA limit set | 7/7 | SYR4 | 2015–2019 |
| Bromoform | 29.1 µg/L No EPA limit set | 7/7 | SYR4 | 2015–2019 |
| Copper | 110 µg/L 8.5% of the EPA limit 1300 µg/L | 7/7 | SYR4 | 2013–2019 |
| Chloroform | 5.66 µg/L No EPA limit set | 7/7 | SYR4 | 2015–2019 |
| Dibromochloromethane | 19.3 µg/L No EPA limit set | 7/7 | SYR4 | 2015–2019 |
| Barium | 44.9 µg/L 2.2% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Fluoride | 1250 µg/L 31% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2013–2019 |
| Chromium | 3.8 µg/L 3.8% of the EPA limit 100 µg/L | 2/3 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 6 µg/L No EPA limit set | 2/2 | SYR4 | 2016–2019 |
| Dichloroacetic Acid | 3.9 µg/L No EPA limit set | 2/2 | SYR4 | 2016–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 2/2 | LCR | 2025 |
| Nitrate | 14.5 µg/L 0.1% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| TTHM | 47.9 µg/L 60% of the EPA limit 80 µg/L | 2/2 | SYR4 | 2016–2019 |
| Total Haloacetic Acids (HAA5) | 12.6 µg/L 21% of the EPA limit 60 µg/L | 2/2 | SYR4 | 2016–2019 |
| Combined Uranium | 1.9 µg/L 6.3% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2017 |
| Lead | 0.6840 µg/L 4.6% of the EPA limit 15 µg/L | 1/7 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1 µg/L No EPA limit set | 1/2 | SYR4 | 2016–2019 |
| Nitrate-Nitrite | 14.5 µg/L 0.1% of the EPA limit 10000 µg/L | 1/3 | SYR4 | 2012–2015 |
| Trichloroacetic Acid | 1.7 µg/L No EPA limit set | 1/2 | SYR4 | 2016–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Valley Acres Mhp Water
Is Valley Acres Mhp Water tap water safe to drink?
EPA monitoring detected 20 contaminants in Valley Acres Mhp Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Valley Acres Mhp Water's water?
EPA monitoring detected Arsenic, Bromodichloromethane, Bromoform, Copper, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Valley Acres Mhp Water serve?
Valley Acres Mhp Water reports serving 54 people in Texas, per its EPA record.
Has Valley Acres Mhp Water had any water quality violations?
The EPA has 446 violations on file for Valley Acres Mhp Water, of which 214 are health-based (a contaminant limit or required treatment was breached) and 6 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.