Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2024-12-11 |
| Other | Monitoring | Resolved | 2024-12-11 |
| Other | Monitoring | Resolved | 2023-12-31 |
| Other | Monitoring | Resolved | 2023-12-31 |
| MR | Monitoring | Resolved | 2023-10-01 |
| MR | Monitoring | Resolved | 2023-10-01 |
| MR | Monitoring | Resolved | 2023-10-01 |
| MR | Monitoring | Resolved | 2023-10-01 |
| MR | Monitoring | Resolved | 2022-12-30 |
| MR | Monitoring | Resolved | 2022-12-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 22.775 µg/L 38% of the EPA limit 60 µg/L
worst single sample: 31.7 µg/L | 60/66 | SYR4 | 2012–2019 |
| Dibromochloromethane | 12.26 µg/L No EPA limit set
worst single sample: 24.5 µg/L | 58/76 | SYR4 | 2012–2019 |
| Bromodichloromethane | 15.57 µg/L No EPA limit set
worst single sample: 25.1 µg/L | 54/76 | SYR4 | 2012–2019 |
| Bromoform | 14.175 µg/L No EPA limit set
worst single sample: 25.1 µg/L | 54/76 | SYR4 | 2012–2019 |
| TTHM | 49.54 µg/L 62% of the EPA limit 80 µg/L
worst single sample: 72.2 µg/L | 53/66 | SYR4 | 2012–2019 |
| Chloroform | 14.6 µg/L No EPA limit set
worst single sample: 27.7 µg/L | 51/76 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 9.975 µg/L No EPA limit set
worst single sample: 20.3 µg/L | 50/66 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 6.62 µg/L No EPA limit set
worst single sample: 14.6 µg/L | 37/66 | SYR4 | 2012–2019 |
| Copper | 197.5 µg/L 15% of the EPA limit 1300 µg/L
worst single sample: 230 µg/L | 31/33 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 6.39 µg/L No EPA limit set
worst single sample: 8.3 µg/L | 30/66 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.22 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 19/66 | SYR4 | 2012–2019 |
| Lead | 7.074 µg/L 47% of the EPA limit 15 µg/L
worst single sample: 7.8 µg/L | 13/33 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 2.825 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 12/66 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2024 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Justin
Is City of Justin tap water safe to drink?
EPA monitoring detected 18 contaminants in City of Justin's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Justin's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), Dibromochloromethane, Bromodichloromethane, Bromoform, TTHM, and others. The full list with the level and data source for each is above.
How many people does City of Justin serve?
City of Justin reports serving 7,537 people in Texas, per its EPA record.
Has City of Justin had any water quality violations?
The EPA has 27 violations on file for City of Justin, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.