← Texas

Tap water quality report

Mountain Wsc

EPA monitoring tested this supplier for 79 contaminants and detected 27. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
27
detected
2,400
people served
56
health-based violations
Water source
SWP
Ownership
Local government
Counties served
Coryell

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

56
health-based violations
93
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
3100 µg/L 238%
of the EPA limit, in the worst sample — 1300 µg/L
117/125 SYR4 2013–2019
Lead
13 µg/L 87%
of the EPA limit 15 µg/L
55/125 SYR4 2013–2019
Bromoform
84.5 µg/L
No EPA limit set
44/44 SYR4 2012–2019
Dibromochloromethane
60.4 µg/L
No EPA limit set
43/44 SYR4 2012–2019
Bromodichloromethane
61.7 µg/L
No EPA limit set
32/44 SYR4 2012–2019
Nitrate
990 µg/L 9.9%
of the EPA limit 10000 µg/L
32/32 SYR4 2012–2019
Dibromoacetic Acid
19.8 µg/L
No EPA limit set
29/29 SYR4 2012–2019
TTHM
224 µg/L 280%
of the EPA limit, in the worst sample — 80 µg/L
29/30 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
211 µg/L 352%
of the EPA limit, in the worst sample — 60 µg/L
29/29 SYR4 2012–2019
Chloroform
117.7 µg/L
No EPA limit set
28/44 SYR4 2012–2019
Dichloroacetic Acid
107.1 µg/L
No EPA limit set
21/29 SYR4 2012–2019
Trichloroacetic Acid
90.9 µg/L
No EPA limit set
19/29 SYR4 2012–2019
Monobromoacetic Acid
4.7 µg/L
No EPA limit set
8/29 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
7/7 LCR 2025
Fluoride
1770 µg/L 44%
of the EPA limit 4000 µg/L
6/6 SYR4 2012–2018
Atrazine
0.1700 µg/L 5.7%
of the EPA limit 3 µg/L
4/12 SYR4 2014–2019
Barium
52.3 µg/L 2.6%
of the EPA limit 2000 µg/L
4/4 SYR4 2014–2018
Monochloroacetic Acid
12.7 µg/L
No EPA limit set
4/29 SYR4 2012–2019
Nitrate-Nitrite
270 µg/L 2.7%
of the EPA limit 10000 µg/L
4/4 SYR4 2012–2019
Xylenes, Total
0.8000 µg/L 0%
of the EPA limit 10000 µg/L
4/15 SYR4 2012–2019
Combined Radium (-226 And -228)
1.5 pCi/L 30%
of the EPA limit 5 pCi/L
3/3 SYR4 2012–2018
Arsenic
6.6 µg/L 66%
of the EPA limit 10 µg/L
2/4 SYR4 2014–2018
Dalapon
2.1 µg/L 1.1%
of the EPA limit 200 µg/L
2/32 SYR4 2012–2019
Di(2-ethylhexyl) Phthalate
0.9600 µg/L 16%
of the EPA limit 6 µg/L
2/12 SYR4 2014–2019
Selenium
23.2 µg/L 46%
of the EPA limit 50 µg/L
2/4 SYR4 2014–2018
Cyanide
80 µg/L 40%
of the EPA limit 200 µg/L
1/4 SYR4 2014–2017
Gross Beta Particle Activity
5.6 pCi/L
No EPA limit set
1/4 SYR4 2012–2018
52 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
RAGLAND, JAMES
Phone
254-865-7113

Frequently asked questions about Mountain Wsc

Is Mountain Wsc tap water safe to drink?

EPA monitoring detected 27 contaminants in Mountain Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Mountain Wsc's water?

EPA monitoring detected Copper, Lead, Bromoform, Dibromochloromethane, Bromodichloromethane, and others. The full list with the level and data source for each is above.

How many people does Mountain Wsc serve?

Mountain Wsc reports serving 2,400 people in Texas, per its EPA record.

Has Mountain Wsc had any water quality violations?

The EPA has 93 violations on file for Mountain Wsc, of which 56 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.