Tap WaterIndex

← Texas

Tap water quality report

Coryell City Water Supply District

EPA monitoring tested this supplier for 108 contaminants and detected 23. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

108
contaminants tested
23
detected
6,042
people served
68
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
SWP
Ownership
Local government
Counties served
Coryell

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

68
health-based violations
132
violations on file
15
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2018-12-21
TT Health-based Resolved 2018-12-21
TT Health-based Resolved 2018-12-21
TT Health-based Resolved 2018-12-21
TT Health-based Resolved 2018-12-21
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfba 0.0061 µg/L 4/8 2025

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
1700 µg/L 131%
of the EPA limit, in the worst sample — 1300 µg/L
 62/62 SYR4 2013–2017
Bromodichloromethane
52 µg/L
No EPA limit set
 59/60 SYR4 2012–2019
Dibromochloromethane
36.6 µg/L
No EPA limit set
 59/60 SYR4 2012–2019
Chloroform
83.4 µg/L
No EPA limit set
 58/60 SYR4 2012–2019
Bromoform
24.5 µg/L
No EPA limit set
 55/60 SYR4 2012–2019
Dichloroacetic Acid
69.1 µg/L
No EPA limit set
 54/54 SYR4 2012–2019
TTHM
186 µg/L 233%
of the EPA limit, in the worst sample — 80 µg/L
 54/54 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
167 µg/L 278%
of the EPA limit, in the worst sample — 60 µg/L
 54/54 SYR4 2012–2019
Dibromoacetic Acid
11.2 µg/L
No EPA limit set
 53/54 SYR4 2012–2019
Trichloroacetic Acid
75.7 µg/L
No EPA limit set
 49/54 SYR4 2012–2019
Lead
40 µg/L 267%
of the EPA limit, in the worst sample — 15 µg/L
 45/62 SYR4 2013–2017
Nitrate
1150 µg/L 12%
of the EPA limit 10000 µg/L
 42/44 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 15/15 LCR 2025
Monobromoacetic Acid
1.9 µg/L
No EPA limit set
 10/54 SYR4 2012–2019
Monochloroacetic Acid
18.5 µg/L
No EPA limit set
 9/54 SYR4 2012–2019
Atrazine
0.2700 µg/L 9%
of the EPA limit 3 µg/L
 6/9 SYR4 2014–2019
Nitrate-Nitrite
1150 µg/L 12%
of the EPA limit 10000 µg/L
 6/6 SYR4 2012–2015
Lithium
61.9 µg/L
No EPA limit set
 3/11 UCMR-5 2025
Barium
69.7 µg/L 3.5%
of the EPA limit 2000 µg/L
 2/2 SYR4 2014–2017
Cyanide
90 µg/L 45%
of the EPA limit 200 µg/L
 2/2 SYR4 2014–2017
Dalapon
1.8 µg/L 0.9%
of the EPA limit 200 µg/L
 2/52 SYR4 2012–2019
Fluoride
210 µg/L 5.3%
of the EPA limit 4000 µg/L
 2/2 SYR4 2014–2017
85 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
NOLTE, TRAVIS, W
Phone
254-865-6089
Email
tnolte@coryellcitywater.com

Frequently asked questions about Coryell City Water Supply District

Is Coryell City Water Supply District tap water safe to drink?

EPA monitoring detected 23 contaminants in Coryell City Water Supply District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Coryell City Water Supply District's water?

EPA monitoring detected Copper, Bromodichloromethane, Dibromochloromethane, Chloroform, Bromoform, and others. The full list with the level and data source for each is above.

How many people does Coryell City Water Supply District serve?

Coryell City Water Supply District reports serving 6,042 people in Texas, per its EPA record.

Has Coryell City Water Supply District had any water quality violations?

The EPA has 132 violations on file for Coryell City Water Supply District, of which 68 are health-based (a contaminant limit or required treatment was breached) and 15 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.