Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2018-02-01 → 2018-02-28 |
| MON | Monitoring | Resolved | 2018-02-01 → 2018-02-28 |
| MON | Monitoring | Resolved | 2018-02-01 → 2018-02-28 |
| MON | Monitoring | Resolved | 2018-02-01 → 2018-02-28 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2010-01-01 → 2010-01-31 |
| MR | Monitoring | Resolved | 2010-01-01 → 2010-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 944 µg/L 73% of the EPA limit 1300 µg/L
worst single sample: 1100 µg/L | 29/30 | SYR4 | 2014–2019 |
| Bromodichloromethane | 22.64 µg/L No EPA limit set
worst single sample: 24.2 µg/L | 25/25 | SYR4 | 2012–2019 |
| Chloroform | 16.88 µg/L No EPA limit set
worst single sample: 18.8 µg/L | 25/25 | SYR4 | 2012–2019 |
| Dibromochloromethane | 13.38 µg/L No EPA limit set
worst single sample: 13.8 µg/L | 25/25 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 16.94 µg/L No EPA limit set
worst single sample: 17.3 µg/L | 25/25 | SYR4 | 2012–2019 |
| TTHM | 53.16 µg/L 66% of the EPA limit 80 µg/L
worst single sample: 55.4 µg/L | 25/25 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 32.56 µg/L 54% of the EPA limit 60 µg/L
worst single sample: 33.3 µg/L | 25/25 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.66 µg/L No EPA limit set
worst single sample: 7.5 µg/L | 25/25 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 10.485 µg/L No EPA limit set
worst single sample: 15.9 µg/L | 20/25 | SYR4 | 2012–2019 |
| Bromoform | 4.945 µg/L No EPA limit set
worst single sample: 5.2 µg/L | 18/25 | SYR4 | 2012–2019 |
| Lead | 42.2 µg/L 281% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 43 µg/L | 17/30 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 3.15 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 11/25 | SYR4 | 2012–2019 |
| Lead | 0.00086 mg/L 5.7% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Monochloroacetic Acid | 5.36 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 9/25 | SYR4 | 2012–2019 |
Utility contact
Frequently asked questions about Milligan Wsc
Is Milligan Wsc tap water safe to drink?
EPA monitoring detected 14 contaminants in Milligan Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Milligan Wsc's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Milligan Wsc serve?
Milligan Wsc reports serving 3,364 people in Texas, per its EPA record.
Has Milligan Wsc had any water quality violations?
The EPA has 15 violations on file for Milligan Wsc, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.