Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MR | Monitoring | Resolved | 2018-01-01 → 2018-03-31 |
| MR | Monitoring | Resolved | 2018-01-01 → 2018-03-31 |
| MR | Monitoring | Resolved | 2018-01-01 → 2018-03-31 |
| MR | Monitoring | Resolved | 2018-01-01 → 2018-03-31 |
| Other | Monitoring | Resolved | 2017-07-01 |
| Other | Monitoring | Resolved | 2017-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 711.5 µg/L 55% of the EPA limit 1300 µg/L
worst single sample: 1200 µg/L | 60/60 | SYR4 | 2013–2017 |
| Bromodichloromethane | 19.8 µg/L No EPA limit set
worst single sample: 32.2 µg/L | 48/48 | SYR4 | 2012–2019 |
| Chloroform | 19.39 µg/L No EPA limit set
worst single sample: 25.8 µg/L | 48/48 | SYR4 | 2012–2019 |
| Dibromochloromethane | 14.795 µg/L No EPA limit set
worst single sample: 17.2 µg/L | 48/48 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 20.68 µg/L No EPA limit set
worst single sample: 23.5 µg/L | 48/48 | SYR4 | 2012–2019 |
| TTHM | 56.38 µg/L 70% of the EPA limit 80 µg/L
worst single sample: 72.7 µg/L | 48/48 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 34.045 µg/L 57% of the EPA limit 60 µg/L
worst single sample: 40.8 µg/L | 48/48 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 6.095 µg/L No EPA limit set
worst single sample: 8.1 µg/L | 48/48 | SYR4 | 2012–2019 |
| Bromoform | 5.478 µg/L No EPA limit set
worst single sample: 16.5 µg/L | 39/48 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 8.28 µg/L No EPA limit set
worst single sample: 13.3 µg/L | 37/48 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 4 µg/L No EPA limit set
worst single sample: 6 µg/L | 31/48 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 6.78 µg/L No EPA limit set
worst single sample: 9.7 µg/L | 24/48 | SYR4 | 2012–2019 |
| Lead | 0.0013 mg/L 8.7% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| Lead | 9.65 µg/L 64% of the EPA limit 15 µg/L
worst single sample: 29 µg/L | 16/60 | SYR4 | 2013–2017 |
28 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Fairview
Is Town of Fairview tap water safe to drink?
EPA monitoring detected 16 contaminants in Town of Fairview's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Fairview's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Town of Fairview serve?
Town of Fairview reports serving 11,100 people in Texas, per its EPA record.
Has Town of Fairview had any water quality violations?
The EPA has 88 violations on file for Town of Fairview, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.