Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2004-11-01 → 2004-11-30 |
| MCL | Health-based | Archived | 2004-11-01 → 2004-11-30 |
| MR | Monitoring | Unaddressed | 2020-03-31 |
| Other | Monitoring | Unaddressed | 2020-03-09 |
| Other | Monitoring | Unaddressed | 2019-11-07 |
| MR | Monitoring | Resolved | 2019-09-29 |
| MR | Monitoring | Resolved | 2019-09-29 |
| Other | Monitoring | Resolved | 2019-07-01 |
| Other | Monitoring | Resolved | 2019-07-01 |
| MR | Monitoring | Resolved | 2019-04-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 3630 µg/L 279% of the EPA limit, in the worst sample — 1300 µg/L | 59/71 | SYR4 | 2016–2019 |
| Lead | 24.3 µg/L 162% of the EPA limit, in the worst sample — 15 µg/L | 39/71 | SYR4 | 2016–2019 |
| Nitrate | 60 µg/L 0.6% of the EPA limit 10000 µg/L | 16/18 | SYR4 | 2012–2019 |
| Bromodichloromethane | 19.2 µg/L No EPA limit set | 15/18 | SYR4 | 2012–2019 |
| Bromoform | 14.8 µg/L No EPA limit set | 15/18 | SYR4 | 2012–2019 |
| Dibromochloromethane | 23.7 µg/L No EPA limit set | 15/18 | SYR4 | 2012–2019 |
| Chloroform | 13.6 µg/L No EPA limit set | 14/18 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 6.2 µg/L No EPA limit set | 12/13 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 17.1 µg/L 29% of the EPA limit 60 µg/L | 12/13 | SYR4 | 2012–2019 |
| TTHM | 60.2 µg/L 75% of the EPA limit 80 µg/L | 11/13 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 7.2 µg/L No EPA limit set | 10/13 | SYR4 | 2012–2019 |
| Lead | 0.0050 mg/L 33% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2024 |
| Trichloroacetic Acid | 5.8 µg/L No EPA limit set | 4/13 | SYR4 | 2012–2019 |
| Fluoride | 600 µg/L 15% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Barium | 9.8 µg/L 0.5% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2016–2019 |
| Nitrate-Nitrite | 60 µg/L 0.6% of the EPA limit 10000 µg/L | 2/3 | SYR4 | 2012–2019 |
| Bhc-Gamma | 0.0500 µg/L 25% of the EPA limit 0.2000 µg/L | 1/6 | SYR4 | 2016–2019 |
| Combined Radium (-226 And -228) | 2.4 pCi/L 48% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2013 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Snook
Is City of Snook tap water safe to drink?
EPA monitoring detected 18 contaminants in City of Snook's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Snook's water?
EPA monitoring detected Copper, Lead, Nitrate, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does City of Snook serve?
City of Snook reports serving 980 people in Texas, per its EPA record.
Has City of Snook had any water quality violations?
The EPA has 112 violations on file for City of Snook, of which 2 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.