Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2014-12-30 |
| MR | Monitoring | Resolved | 2014-12-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-09-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-09-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-09-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-09-30 |
| Other | Monitoring | Resolved | 2014-07-01 |
| Other | Monitoring | Resolved | 2014-07-01 |
| Other | Monitoring | Resolved | 2013-07-01 |
| Other | Monitoring | Resolved | 2013-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2260 µg/L 23% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Copper | 338 µg/L 26% of the EPA limit 1300 µg/L
worst single sample: 474 µg/L | 11/12 | SYR4 | 2014–2017 |
| Lead | 4.44 µg/L 30% of the EPA limit 15 µg/L
worst single sample: 5.2 µg/L | 9/12 | SYR4 | 2014–2017 |
| Lead | 0.0024 mg/L 16% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2024 |
| Dibromochloromethane | 2.94 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 5/8 | SYR4 | 2013–2019 |
| Bromoform | 1.625 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 4/8 | SYR4 | 2013–2019 |
| Fluoride | 159 µg/L 4% of the EPA limit 4000 µg/L
worst single sample: 160 µg/L | 3/3 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 1765 µg/L 18% of the EPA limit 10000 µg/L
worst single sample: 1770 µg/L | 3/3 | SYR4 | 2012–2015 |
| Barium | 41.675 µg/L 2.1% of the EPA limit 2000 µg/L
worst single sample: 41.8 µg/L | 2/2 | SYR4 | 2014–2017 |
| Chloroform | 1.48 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 2/8 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2015–2018 |
| TTHM | 2.69 µg/L 3.4% of the EPA limit 80 µg/L
worst single sample: 2.7 µg/L | 2/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2.2 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
66 contaminants tested, none detected
Utility contact
Frequently asked questions about Cadillac Water
Is Cadillac Water tap water safe to drink?
EPA monitoring detected 13 contaminants in Cadillac Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cadillac Water's water?
EPA monitoring detected Nitrate, Copper, Lead, Lead, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Cadillac Water serve?
Cadillac Water reports serving 252 people in Texas, per its EPA record.
Has Cadillac Water had any water quality violations?
The EPA has 67 violations on file for Cadillac Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.