Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2006-09-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-09-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-09-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-09-01 → 2006-09-30 |
| MR | Monitoring | Resolved | 2025-10-01 |
| MR | Monitoring | Resolved | 2025-10-01 |
| MR | Monitoring | Resolved | 2025-10-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
| MR | Monitoring | Resolved | 2020-10-01 → 2020-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 60 µg/L 0.6% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Copper | 28 µg/L 2.2% of the EPA limit 1300 µg/L | 12/12 | SYR4 | 2012–2019 |
| Bromoform | 8.4 µg/L No EPA limit set | 9/9 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.3 µg/L No EPA limit set | 9/9 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 1.9 µg/L 32% of the EPA limit 6 µg/L | 4/7 | SYR4 | 2014–2019 |
| Barium | 82.6 µg/L 4.1% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.8 µg/L No EPA limit set | 3/3 | SYR4 | 2013–2019 |
| Fluoride | 990 µg/L 25% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Lead | 0.0014 mg/L 9% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 2026 |
| TTHM | 12.7 µg/L 16% of the EPA limit 80 µg/L | 3/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 6.3 µg/L 11% of the EPA limit 60 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 1 µg/L No EPA limit set | 2/9 | SYR4 | 2012–2019 |
| Lead | 1.3 µg/L 8.7% of the EPA limit 15 µg/L | 2/12 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Monochloroacetic Acid | 4.2 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 40 µg/L 0.4% of the EPA limit 10000 µg/L | 1/2 | SYR4 | 2014–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about J & R Mhp
Is J & R Mhp tap water safe to drink?
EPA monitoring detected 16 contaminants in J & R Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in J & R Mhp's water?
EPA monitoring detected Nitrate, Copper, Bromoform, Dibromochloromethane, Di(2-ethylhexyl) Phthalate, and others. The full list with the level and data source for each is above.
How many people does J & R Mhp serve?
J & R Mhp reports serving 46 people in Texas, per its EPA record.
Has J & R Mhp had any water quality violations?
The EPA has 19 violations on file for J & R Mhp, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.