Tap WaterIndex

← Texas

Tap water quality report

M & M Wsc

EPA monitoring tested this supplier for 80 contaminants and detected 21. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

80
contaminants tested
21
detected
3,208
people served
19
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
Ground water
Ownership
Local government
Counties served
Angelina

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

19
health-based violations
128
violations on file
3
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2020-04-01 → 2020-06-30
MCL Health-based Resolved 2020-04-01 → 2020-06-30
MCL Health-based Resolved 2020-04-01 → 2020-06-30
MCL Health-based Resolved 2020-04-01 → 2020-06-30
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chlorite
660 µg/L 66%
of the EPA limit 1000 µg/L
 352/428 SYR4 2013–2019
Bromodichloromethane
34.9 µg/L
No EPA limit set
 68/68 SYR4 2012–2019
Chloroform
77.4 µg/L
No EPA limit set
 68/68 SYR4 2012–2019
Dibromochloromethane
10.1 µg/L
No EPA limit set
 68/68 SYR4 2012–2019
Dichloroacetic Acid
30.2 µg/L
No EPA limit set
 56/56 SYR4 2012–2019
TTHM
114 µg/L 143%
of the EPA limit, in the worst sample — 80 µg/L
 56/56 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
70.8 µg/L 118%
of the EPA limit, in the worst sample — 60 µg/L
 56/56 SYR4 2012–2019
Trichloroacetic Acid
38.7 µg/L
No EPA limit set
 56/56 SYR4 2012–2019
Copper
1200 µg/L 92%
of the EPA limit 1300 µg/L
 49/52 SYR4 2014–2019
Lead
16 µg/L 107%
of the EPA limit, in the worst sample — 15 µg/L
 40/52 SYR4 2014–2019
Dibromoacetic Acid
13.8 µg/L
No EPA limit set
 31/56 SYR4 2012–2019
Monochloroacetic Acid
7.5 µg/L
No EPA limit set
 23/56 SYR4 2012–2019
Nitrate
69.5 µg/L 0.7%
of the EPA limit 10000 µg/L
 16/32 SYR4 2012–2019
Lead
0.0010 mg/L 6.9%
of the EPA limit 0.0150 mg/L
 13/13 LCR 2025
Barium
12 µg/L 0.6%
of the EPA limit 2000 µg/L
 4/4 SYR4 2016–2019
Fluoride
350 µg/L 8.8%
of the EPA limit 4000 µg/L
 4/4 SYR4 2014–2017
Xylenes, Total
4.26 µg/L 0%
of the EPA limit 10000 µg/L
 4/12 SYR4 2015–2019
Monobromoacetic Acid
1.5 µg/L
No EPA limit set
 3/56 SYR4 2012–2019
Nitrate-Nitrite
40 µg/L 0.4%
of the EPA limit 10000 µg/L
 3/8 SYR4 2012–2019
Combined Radium (-226 And -228)
1.5 pCi/L 30%
of the EPA limit 5 pCi/L
 1/1 SYR4 2015
Thallium, Total
0.3100 µg/L 16%
of the EPA limit 2 µg/L
 1/4 SYR4 2016–2019
59 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
VANN, JERRY
Phone
936-632-8224
Email
mmwatersupplycorp@gmail.com

Frequently asked questions about M & M Wsc

Is M & M Wsc tap water safe to drink?

EPA monitoring detected 21 contaminants in M & M Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in M & M Wsc's water?

EPA monitoring detected Chlorite, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does M & M Wsc serve?

M & M Wsc reports serving 3,208 people in Texas, per its EPA record.

Has M & M Wsc had any water quality violations?

The EPA has 128 violations on file for M & M Wsc, of which 19 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.