← Tennessee

Tap water quality report

Northwest Utility District

EPA monitoring tested this supplier for 59 contaminants and detected 4. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

59
contaminants tested
4
detected
20,710
people served
6
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Hamilton

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

6
health-based violations
39
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2001-07-01 → 2001-07-31
MCL Health-based Archived 2001-07-01 → 2001-07-31
MCL Health-based Archived 2001-07-01 → 2001-07-31
MCL Health-based Archived 2001-07-01 → 2001-07-31
MCL Health-based Archived 1997-09-01 → 1997-09-30
MCL Health-based Archived 1997-09-01 → 1997-09-30
Other Monitoring Resolved 2024-07-01
Other Monitoring Resolved 2024-07-01
MR Monitoring Resolved 2020-07-01 → 2020-09-30
MR Monitoring Resolved 2020-07-01 → 2020-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
72.3 µg/L 90%
of the EPA limit 80 µg/L
285/288 SYR4 2014–2019
Total Haloacetic Acids (HAA5)
74.7 µg/L 125%
of the EPA limit, in the worst sample — 60 µg/L
282/288 SYR4 2014–2019
Nitrate
1140 µg/L 11%
of the EPA limit 10000 µg/L
20/20 SYR4 2014–2019
Lead
0.0010 mg/L 6.7%
of the EPA limit 0.0150 mg/L
11/11 LCR 2025
55 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAtrazineBenzeneChlorobenzeneCarbon TetrachlorideDichloromethaneEthylbenzeneGross Alpha, Excl. Radon And UHfpo-DaNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPicloramStyreneTetrachloroethyleneTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
CAIN, JACK
Phone
423-332-2427
Email
JACK.CAIN@GMAIL.COM

Frequently asked questions about Northwest Utility District

Is Northwest Utility District tap water safe to drink?

EPA monitoring detected 4 contaminants in Northwest Utility District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Northwest Utility District's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Nitrate, Lead. The full list with the level and data source for each is above.

How many people does Northwest Utility District serve?

Northwest Utility District reports serving 20,710 people in Tennessee, per its EPA record.

Has Northwest Utility District had any water quality violations?

The EPA has 39 violations on file for Northwest Utility District, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.