Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 314 µg/L 24% of the EPA limit 1300 µg/L
worst single sample: 390 µg/L | 27/27 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2023 |
| Bromodichloromethane | 11.1505 µg/L No EPA limit set
worst single sample: 11.56 µg/L | 10/10 | SYR4 | 2014–2019 |
| Chloroform | 40.805 µg/L No EPA limit set
worst single sample: 43.73 µg/L | 10/10 | SYR4 | 2014–2019 |
| Dibromochloromethane | 1.73121 µg/L No EPA limit set
worst single sample: 1.8353 µg/L | 10/10 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 31.263 µg/L No EPA limit set
worst single sample: 32.55 µg/L | 10/10 | SYR4 | 2014–2019 |
| TTHM | 53.176 µg/L 66% of the EPA limit 80 µg/L
worst single sample: 56.56 µg/L | 10/10 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 50.708 µg/L 85% of the EPA limit 60 µg/L
worst single sample: 52.4 µg/L | 10/10 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 19.823 µg/L No EPA limit set
worst single sample: 19.85 µg/L | 10/10 | SYR4 | 2014–2019 |
| Lead | 10.22 µg/L 68% of the EPA limit 15 µg/L
worst single sample: 12 µg/L | 5/27 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.505 µg/L No EPA limit set
worst single sample: 1.53 µg/L | 3/10 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 3.088 µg/L No EPA limit set
worst single sample: 3.09 µg/L | 2/10 | SYR4 | 2014–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Bgwc Indian Pines (sc3250051)
Is Bgwc Indian Pines (sc3250051) tap water safe to drink?
EPA monitoring detected 12 contaminants in Bgwc Indian Pines (sc3250051)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bgwc Indian Pines (sc3250051)'s water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Bgwc Indian Pines (sc3250051) serve?
Bgwc Indian Pines (sc3250051) reports serving 43 people in South Carolina, per its EPA record.
Has Bgwc Indian Pines (sc3250051) had any water quality violations?
The EPA has 107 violations on file for Bgwc Indian Pines (sc3250051), of which 80 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.