Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2019-10-01 |
| MR | Monitoring | Resolved | 2019-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 260 µg/L 2.6% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Copper | 1195 µg/L 92% of the EPA limit 1300 µg/L
worst single sample: 2000 µg/L | 15/15 | SYR4 | 2013–2019 |
| Bromodichloromethane | 14.9895 µg/L No EPA limit set
worst single sample: 17.18 µg/L | 14/14 | SYR4 | 2013–2019 |
| Chloroform | 25.8815 µg/L No EPA limit set
worst single sample: 31.01 µg/L | 14/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 6.3215 µg/L No EPA limit set
worst single sample: 9.5 µg/L | 14/14 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 27.867 µg/L No EPA limit set
worst single sample: 34.9 µg/L | 14/14 | SYR4 | 2013–2019 |
| TTHM | 45.7685 µg/L 57% of the EPA limit 80 µg/L
worst single sample: 48.31 µg/L | 14/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 43.295 µg/L 72% of the EPA limit 60 µg/L
worst single sample: 45.7 µg/L | 14/14 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 7.52 µg/L No EPA limit set
worst single sample: 10.01 µg/L | 13/14 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 13.889 µg/L No EPA limit set
worst single sample: 15.55 µg/L | 12/14 | SYR4 | 2013–2019 |
| Lead | 18.64 µg/L 124% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 25 µg/L | 9/15 | SYR4 | 2013–2019 |
| Lead | 0.0140 mg/L 93% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2023 |
| Fluoride | 786 µg/L 20% of the EPA limit 4000 µg/L
worst single sample: 900 µg/L | 7/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 7.2325 µg/L No EPA limit set
worst single sample: 7.4 µg/L | 6/14 | SYR4 | 2013–2019 |
| Atrazine | 0.2595 µg/L 8.7% of the EPA limit 3 µg/L
worst single sample: 0.2600 µg/L | 2/10 | SYR4 | 2012–2019 |
| Chromium | 5.7 µg/L 5.7% of the EPA limit 100 µg/L | 1/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 260 µg/L 2.6% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2012 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Gsw&Sa-Myrtle Beach (sc2620009)
Is Gsw&Sa-Myrtle Beach (sc2620009) tap water safe to drink?
EPA monitoring detected 17 contaminants in Gsw&Sa-Myrtle Beach (sc2620009)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Gsw&Sa-Myrtle Beach (sc2620009)'s water?
EPA monitoring detected Nitrate, Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Gsw&Sa-Myrtle Beach (sc2620009) serve?
Gsw&Sa-Myrtle Beach (sc2620009) reports serving 25 people in South Carolina, per its EPA record.
Has Gsw&Sa-Myrtle Beach (sc2620009) had any water quality violations?
The EPA has 2 violations on file for Gsw&Sa-Myrtle Beach (sc2620009), of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.