← South Carolina

Tap water quality report

Belton-Honea Path Wa (sc0410011)

EPA monitoring tested this supplier for 75 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

75
contaminants tested
15
detected
2,555
people served
0
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Anderson

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
16
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 1993-07-01 → 1993-09-30
MR Monitoring Resolved 1993-07-01 → 1993-09-30
MR Monitoring Resolved 1993-07-01 → 1993-07-31
MR Monitoring Resolved 1993-07-01 → 1993-07-31
MR Monitoring Resolved 1993-07-01 → 1993-07-31
MR Monitoring Resolved 1993-04-01 → 1993-06-30
MR Monitoring Resolved 1993-01-01 → 1993-01-31
MR Monitoring Resolved 1993-01-01 → 1993-01-31
MR Monitoring Resolved 1993-01-01 → 1993-01-31
MR Monitoring Resolved 1993-01-01 → 1993-01-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
18.4 µg/L
No EPA limit set
74/74 SYR4 2012–2019
Chloroform
88 µg/L
No EPA limit set
74/74 SYR4 2012–2019
TTHM
100.9 µg/L 126%
of the EPA limit, in the worst sample — 80 µg/L
74/74 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
65.15 µg/L 109%
of the EPA limit, in the worst sample — 60 µg/L
74/74 SYR4 2012–2019
Dichloroacetic Acid
31.44 µg/L
No EPA limit set
73/74 SYR4 2012–2019
Trichloroacetic Acid
33.2 µg/L
No EPA limit set
72/74 SYR4 2012–2019
Dibromochloromethane
4.6 µg/L
No EPA limit set
63/74 SYR4 2012–2019
Copper
290 µg/L 22%
of the EPA limit 1300 µg/L
59/70 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
19/19 LCR 2025
Nitrate
500 µg/L 5%
of the EPA limit 10000 µg/L
16/16 SYR4 2012–2019
Monobromoacetic Acid
4.57 µg/L
No EPA limit set
13/74 SYR4 2012–2019
Lead
19 µg/L 127%
of the EPA limit, in the worst sample — 15 µg/L
9/70 SYR4 2012–2019
Fluoride
800 µg/L 20%
of the EPA limit 4000 µg/L
7/8 SYR4 2012–2019
Dibromoacetic Acid
1 µg/L
No EPA limit set
2/74 SYR4 2012–2019
1,2-DIBROMO-3-CHLOROPROPANE
0.0560 µg/L 28%
of the EPA limit 0.2000 µg/L
1/11 SYR4 2012–2019
60 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined Radium (-226 And -228)DichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonochloroacetic AcidOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
ELLENBURG, MITCHELL A
Phone
864-369-7442
Email
mitch@bhp-water.com; MATT@BHP-WATER.COM

Frequently asked questions about Belton-Honea Path Wa (sc0410011)

Is Belton-Honea Path Wa (sc0410011) tap water safe to drink?

EPA monitoring detected 15 contaminants in Belton-Honea Path Wa (sc0410011)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Belton-Honea Path Wa (sc0410011)'s water?

EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Belton-Honea Path Wa (sc0410011) serve?

Belton-Honea Path Wa (sc0410011) reports serving 2,555 people in South Carolina, per its EPA record.

Has Belton-Honea Path Wa (sc0410011) had any water quality violations?

The EPA has 16 violations on file for Belton-Honea Path Wa (sc0410011), of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.