Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 162.45 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 1498 µg/L | 38/40 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 71.9 µg/L 120% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 98 µg/L | 36/36 | SYR4 | 2012–2019 |
| Bromodichloromethane | 24.55 µg/L No EPA limit set
worst single sample: 35.5 µg/L | 34/35 | SYR4 | 2012–2019 |
| Chloroform | 96.325 µg/L No EPA limit set
worst single sample: 109 µg/L | 34/35 | SYR4 | 2012–2019 |
| TTHM | 118.8 µg/L 149% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 150 µg/L | 34/35 | SYR4 | 2012–2019 |
| Dibromochloromethane | 8.2 µg/L No EPA limit set
worst single sample: 15.8 µg/L | 31/35 | SYR4 | 2012–2019 |
| Lead | 5.4 µg/L 36% of the EPA limit 15 µg/L
worst single sample: 8 µg/L | 14/39 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 25.625 µg/L No EPA limit set
worst single sample: 27.8 µg/L | 6/6 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 43.7 µg/L No EPA limit set
worst single sample: 48.8 µg/L | 6/6 | SYR4 | 2018–2019 |
| Monochloroacetic Acid | 3.55 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 3/6 | SYR4 | 2018–2019 |
| Bromoform | 1.37 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 2/35 | SYR4 | 2012–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Landis Homes
Is Landis Homes tap water safe to drink?
EPA monitoring detected 11 contaminants in Landis Homes's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Landis Homes's water?
EPA monitoring detected Copper, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, TTHM, and others. The full list with the level and data source for each is above.
How many people does Landis Homes serve?
Landis Homes reports serving 850 people in Pennsylvania, per its EPA record.
Has Landis Homes had any water quality violations?
The EPA has 191 violations on file for Landis Homes, of which 89 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.