Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1988-06-24 → 1991-06-23 |
| MCL | Health-based | Resolved | 1988-06-24 → 1991-06-23 |
| MCL | Health-based | Resolved | 1988-06-24 → 1991-06-23 |
| MCL | Health-based | Resolved | 1988-06-24 → 1991-06-23 |
| MCL | Health-based | Resolved | 1988-06-24 → 1991-06-23 |
| MCL | Health-based | Resolved | 1988-06-24 → 1991-06-23 |
| MCL | Health-based | Resolved | 1988-06-24 → 1991-06-23 |
| Other | Monitoring | Resolved | 2025-10-01 |
| Other | Monitoring | Resolved | 2025-10-01 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 9620 µg/L 96% of the EPA limit 10000 µg/L | 64/64 | SYR4 | 2012–2019 |
| Copper | 1970 µg/L 152% of the EPA limit, in the worst sample — 1300 µg/L | 45/70 | SYR4 | 2012–2019 |
| Lead | 22 µg/L 147% of the EPA limit, in the worst sample — 15 µg/L | 7/70 | SYR4 | 2012–2019 |
| Xylenes, Total | 5.3 µg/L 0.1% of the EPA limit 10000 µg/L | 5/9 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.8 µg/L No EPA limit set | 4/4 | SYR4 | 2013–2018 |
| TTHM | 19 µg/L 24% of the EPA limit 80 µg/L | 4/4 | SYR4 | 2013–2018 |
| Bromodichloromethane | 5.5 µg/L No EPA limit set | 3/4 | SYR4 | 2013–2018 |
| Chloroform | 6.1 µg/L No EPA limit set | 3/4 | SYR4 | 2013–2018 |
| Lead | 0.0049 mg/L 33% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 1996 |
| Total Haloacetic Acids (HAA5) | 4.28 µg/L 7.1% of the EPA limit 60 µg/L | 3/4 | SYR4 | 2013–2018 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 2/3 | SYR4 | 2012–2018 |
| Barium | 16 µg/L 0.8% of the EPA limit 2000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Bromoform | 2.6 µg/L No EPA limit set | 2/4 | SYR4 | 2013–2018 |
| Chromium | 2 µg/L 2% of the EPA limit 100 µg/L | 2/3 | SYR4 | 2012–2018 |
| Ethylbenzene | 0.8000 µg/L 0.1% of the EPA limit 700 µg/L | 2/9 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.51 µg/L No EPA limit set | 1/1 | SYR4 | 2018 |
| Dichloroacetic Acid | 1.18 µg/L No EPA limit set | 1/1 | SYR4 | 2018 |
| Trichloroacetic Acid | 1.59 µg/L No EPA limit set | 1/1 | SYR4 | 2018 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Hawk Valley Village
Is Hawk Valley Village tap water safe to drink?
EPA monitoring detected 18 contaminants in Hawk Valley Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hawk Valley Village's water?
EPA monitoring detected Nitrate, Copper, Lead, Xylenes, Total, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Hawk Valley Village serve?
Hawk Valley Village reports serving 250 people in Pennsylvania, per its EPA record.
Has Hawk Valley Village had any water quality violations?
The EPA has 200 violations on file for Hawk Valley Village, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.