← Pennsylvania

Tap water quality report

Millfair Heights Water

EPA monitoring tested this supplier for 79 contaminants and detected 17. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
17
detected
390
people served
3
health-based violations
Water source
Ground water
Ownership
Private
Counties served
Erie

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
175
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2008-10-01 → 2008-10-31
MCL Health-based Resolved 2008-10-01 → 2008-10-31
MCL Health-based Resolved 2008-10-01 → 2008-10-31
Other Monitoring Resolved 2025-10-01
Other Monitoring Resolved 2025-10-01
MR Monitoring Resolved 2025-10-01 → 2025-12-31
MR Monitoring Resolved 2025-10-01 → 2025-12-31
MR Monitoring Resolved 2025-10-01 → 2025-12-31
MR Monitoring Resolved 2025-10-01 → 2025-12-31
MR Monitoring Resolved 2025-10-01 → 2025-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
2230 µg/L 22%
of the EPA limit 10000 µg/L
32/32 SYR4 2012–2019
Copper
592 µg/L 46%
of the EPA limit 1300 µg/L
15/15 SYR4 2013–2019
Barium
151 µg/L 7.6%
of the EPA limit 2000 µg/L
6/6 SYR4 2012–2018
Bromodichloromethane
3.7 µg/L
No EPA limit set
2/2 SYR4 2015–2018
Chloroform
28.6 µg/L
No EPA limit set
2/2 SYR4 2015–2018
Combined Uranium
2.47489 µg/L 8.2%
of the EPA limit 30 µg/L
2/3 SYR4 2013–2016
Dibromochloromethane
2.2 µg/L
No EPA limit set
2/2 SYR4 2015–2018
Lead
0.0046 mg/L 31%
of the EPA limit 0.0150 mg/L
2/2 LCR 1996
TTHM
34.5 µg/L 43%
of the EPA limit 80 µg/L
2/2 SYR4 2015–2018
Total Haloacetic Acids (HAA5)
13 µg/L 22%
of the EPA limit 60 µg/L
2/2 SYR4 2015–2018
Dibromoacetic Acid
1.9 µg/L
No EPA limit set
1/1 SYR4 2018
Dichloroacetic Acid
1.6 µg/L
No EPA limit set
1/1 SYR4 2018
Fluoride
112 µg/L 2.8%
of the EPA limit 4000 µg/L
1/6 SYR4 2012–2018
Lead
10 µg/L 67%
of the EPA limit 15 µg/L
1/15 SYR4 2013–2019
Monobromoacetic Acid
1.4 µg/L
No EPA limit set
1/1 SYR4 2018
Monochloroacetic Acid
0.7200 µg/L
No EPA limit set
1/1 SYR4 2018
Trichloroacetic Acid
0.8400 µg/L
No EPA limit set
1/1 SYR4 2018
62 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
JEFF DONOVAN
Phone
814-833-9273

Frequently asked questions about Millfair Heights Water

Is Millfair Heights Water tap water safe to drink?

EPA monitoring detected 17 contaminants in Millfair Heights Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Millfair Heights Water's water?

EPA monitoring detected Nitrate, Copper, Barium, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Millfair Heights Water serve?

Millfair Heights Water reports serving 390 people in Pennsylvania, per its EPA record.

Has Millfair Heights Water had any water quality violations?

The EPA has 175 violations on file for Millfair Heights Water, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.