Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| TT | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| TT | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| TT | Health-based | Resolved | 2012-02-01 → 2012-02-29 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 403.25 µg/L 31% of the EPA limit 1300 µg/L
worst single sample: 4700 µg/L | 80/80 | SYR4 | 2013–2019 |
| Nitrate | 6602.5 µg/L 66% of the EPA limit 10000 µg/L
worst single sample: 9100 µg/L | 66/88 | SYR4 | 2012–2019 |
| TTHM | 13.205 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 13.7 µg/L | 10/10 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.576 µg/L No EPA limit set
worst single sample: 4.94 µg/L | 9/10 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2025 |
| Dibromochloromethane | 4.3295 µg/L No EPA limit set
worst single sample: 4.34 µg/L | 8/10 | SYR4 | 2012–2019 |
| Chloroform | 4.63 µg/L No EPA limit set
worst single sample: 5.08 µg/L | 7/10 | SYR4 | 2012–2019 |
| Barium | 164.25 µg/L 8.2% of the EPA limit 2000 µg/L
worst single sample: 169 µg/L | 6/9 | SYR4 | 2012–2018 |
| Bromoform | 1.8165 µg/L No EPA limit set
worst single sample: 1.86 µg/L | 4/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 19.383 µg/L 32% of the EPA limit 60 µg/L
worst single sample: 22.2 µg/L | 4/10 | SYR4 | 2012–2019 |
| Lead | 19.32 µg/L 129% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 21 µg/L | 3/59 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 5.7775 µg/L No EPA limit set
worst single sample: 5.98 µg/L | 2/2 | SYR4 | 2015–2019 |
| Dibromoacetic Acid | 2.6 µg/L No EPA limit set | 1/2 | SYR4 | 2015–2019 |
| Fluoride | 110 µg/L 2.8% of the EPA limit 4000 µg/L | 1/9 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 13.6 µg/L No EPA limit set | 1/2 | SYR4 | 2015–2019 |
95 contaminants tested, none detected
Utility contact
Frequently asked questions about Girard Boro Water Dept
Is Girard Boro Water Dept tap water safe to drink?
EPA monitoring detected 15 contaminants in Girard Boro Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Girard Boro Water Dept's water?
EPA monitoring detected Copper, Nitrate, TTHM, Bromodichloromethane, Lead, and others. The full list with the level and data source for each is above.
How many people does Girard Boro Water Dept serve?
Girard Boro Water Dept reports serving 3,301 people in Pennsylvania, per its EPA record.
Has Girard Boro Water Dept had any water quality violations?
The EPA has 1016 violations on file for Girard Boro Water Dept, of which 14 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.