Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2024-05-12 |
| TT | Health-based | Unaddressed | 2024-05-12 |
| MCL | Health-based | Resolved | 2010-04-01 → 2010-06-30 |
| MCL | Health-based | Resolved | 2010-04-01 → 2010-06-30 |
| MCL | Health-based | Resolved | 2010-04-01 → 2010-06-30 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Arsenic | 23.06 µg/L 231% of the EPA limit, in the worst sample — 10 µg/L | 22/39 | SYR4 | 2012–2019 |
| Copper | 180 µg/L 14% of the EPA limit 1300 µg/L | 17/20 | SYR4 | 2013–2019 |
| Lead | 48.8 µg/L 325% of the EPA limit, in the worst sample — 15 µg/L | 9/20 | SYR4 | 2013–2019 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 1996 |
| TTHM | 14.6 µg/L 18% of the EPA limit 80 µg/L | 3/4 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 7.8 µg/L 13% of the EPA limit 60 µg/L | 3/4 | SYR4 | 2013–2018 |
| Barium | 148 µg/L 7.4% of the EPA limit 2000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Bromodichloromethane | 1.5 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2018 |
| Bromoform | 0.6300 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2018 |
| Chloroform | 0.9100 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2018 |
| Dibromoacetic Acid | 610 µg/L No EPA limit set | 2/2 | SYR4 | 2018 |
| Dibromochloromethane | 2.2 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2018 |
| Dichloroacetic Acid | 720 µg/L No EPA limit set | 2/2 | SYR4 | 2018 |
| Nitrate | 5210 µg/L 52% of the EPA limit 10000 µg/L | 2/26 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 800 µg/L No EPA limit set | 2/2 | SYR4 | 2018 |
| Monobromoacetic Acid | 1.3 µg/L No EPA limit set | 1/2 | SYR4 | 2018 |
| Monochloroacetic Acid | 0.7600 µg/L No EPA limit set | 1/2 | SYR4 | 2018 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Conneaut Lake Park Water
Is Conneaut Lake Park Water tap water safe to drink?
EPA monitoring detected 18 contaminants in Conneaut Lake Park Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Conneaut Lake Park Water's water?
EPA monitoring detected Arsenic, Copper, Lead, Fluoride, Lead, and others. The full list with the level and data source for each is above.
How many people does Conneaut Lake Park Water serve?
Conneaut Lake Park Water reports serving 250 people in Pennsylvania, per its EPA record.
Has Conneaut Lake Park Water had any water quality violations?
The EPA has 512 violations on file for Conneaut Lake Park Water, of which 149 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.