Tap WaterIndex

← Pennsylvania

Tap water quality report

Pike Twp Municipal Authority

EPA monitoring tested this supplier for 108 contaminants and detected 14. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

108
contaminants tested
14
detected
4,500
people served
66
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Surface water
Ownership
Local government
Counties served
Clearfield

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

66
health-based violations
533
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2018-01-01 → 2018-03-31
MCL Health-based Resolved 2018-01-01 → 2018-03-31
MCL Health-based Resolved 2018-01-01 → 2018-03-31
MCL Health-based Resolved 2018-01-01 → 2018-03-31
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-07-01 → 2016-09-30
MCL Health-based Resolved 2016-04-01 → 2016-06-30
MCL Health-based Resolved 2016-04-01 → 2016-06-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chloroform
75 µg/L
No EPA limit set
 62/62 SYR4 2012–2019
Copper
872 µg/L 67%
of the EPA limit 1300 µg/L
 60/60 SYR4 2013–2019
Bromodichloromethane
8 µg/L
No EPA limit set
 56/56 SYR4 2012–2019
TTHM
82 µg/L 102%
of the EPA limit, in the worst sample — 80 µg/L
 56/56 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
133 µg/L 222%
of the EPA limit, in the worst sample — 60 µg/L
 56/56 SYR4 2012–2019
Dichloroacetic Acid
260 µg/L
No EPA limit set
 43/43 SYR4 2014–2019
Trichloroacetic Acid
62 µg/L
No EPA limit set
 43/43 SYR4 2014–2019
Lead
0.0013 mg/L 8.3%
of the EPA limit 0.0150 mg/L
 13/13 LCR 2025
Lead
30 µg/L 200%
of the EPA limit, in the worst sample — 15 µg/L
 4/60 SYR4 2013–2019
Dibromochloromethane
1 µg/L
No EPA limit set
 3/56 SYR4 2012–2019
Barium
80 µg/L 4%
of the EPA limit 2000 µg/L
 1/8 SYR4 2012–2019
Benzo(A)Pyrene
0.2200 µg/L 110%
of the EPA limit, in the worst sample — 0.2000 µg/L
 1/10 SYR4 2014–2019
Nitrite
18 µg/L 1.8%
of the EPA limit 1000 µg/L
 1/8 SYR4 2012–2019
Toluene
0.6000 µg/L 0.1%
of the EPA limit 1000 µg/L
 1/8 SYR4 2012–2019
94 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitrateOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
TOM PETERS
Phone
814-236-2466

Frequently asked questions about Pike Twp Municipal Authority

Is Pike Twp Municipal Authority tap water safe to drink?

EPA monitoring detected 14 contaminants in Pike Twp Municipal Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Pike Twp Municipal Authority's water?

EPA monitoring detected Chloroform, Copper, Bromodichloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Pike Twp Municipal Authority serve?

Pike Twp Municipal Authority reports serving 4,500 people in Pennsylvania, per its EPA record.

Has Pike Twp Municipal Authority had any water quality violations?

The EPA has 533 violations on file for Pike Twp Municipal Authority, of which 66 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.