← Pennsylvania

Tap water quality report

Derry Boro Muni Auth

EPA monitoring tested this supplier for 110 contaminants and detected 14. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

110
contaminants tested
14
detected
6,500
people served
1
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Westmoreland

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

1
health-based violations
335
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 1985-08-26 → 1985-10-25
MON Monitoring Resolved 2025-04-01 → 2025-04-30
MON Monitoring Resolved 2025-04-01 → 2025-04-30
MON Monitoring Resolved 2025-04-01 → 2025-04-30
MON Monitoring Resolved 2025-04-01 → 2025-04-30
MR Monitoring Resolved 2024-10-01 → 2024-12-31
MR Monitoring Resolved 2024-10-01 → 2024-12-31
MR Monitoring Resolved 2024-10-01 → 2024-12-31
MR Monitoring Resolved 2024-10-01 → 2024-12-31
MR Monitoring Resolved 2024-10-01 → 2024-12-31

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
PFBS 0.0150 µg/L 4/4 2023

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
909 µg/L 70%
of the EPA limit 1300 µg/L
55/60 SYR4 2013–2019
Bromodichloromethane
7.1 µg/L
No EPA limit set
52/52 SYR4 2012–2019
Chloroform
44.9 µg/L
No EPA limit set
52/52 SYR4 2012–2019
TTHM
51.9 µg/L 65%
of the EPA limit 80 µg/L
52/52 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
50.6 µg/L 84%
of the EPA limit 60 µg/L
42/52 SYR4 2012–2019
Trichloroacetic Acid
20.4 µg/L
No EPA limit set
40/50 SYR4 2013–2019
Dibromochloromethane
1.85 µg/L
No EPA limit set
38/52 SYR4 2012–2019
Dichloroacetic Acid
31.9 µg/L
No EPA limit set
32/50 SYR4 2013–2019
Lead
0.0010 mg/L 6.9%
of the EPA limit 0.0150 mg/L
13/13 LCR 2025
Lead
69.9 µg/L 466%
of the EPA limit, in the worst sample — 15 µg/L
11/60 SYR4 2013–2019
Barium
42.9 µg/L 2.1%
of the EPA limit 2000 µg/L
8/8 SYR4 2012–2019
Monochloroacetic Acid
4.47 µg/L
No EPA limit set
5/50 SYR4 2013–2019
Selenium
2.45 µg/L 4.9%
of the EPA limit 50 µg/L
1/8 SYR4 2012–2019
96 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitrateNitriteOxamylPfbaPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
RON SEICH
Phone
724-694-2305

Frequently asked questions about Derry Boro Muni Auth

Is Derry Boro Muni Auth tap water safe to drink?

EPA monitoring detected 14 contaminants in Derry Boro Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Derry Boro Muni Auth's water?

EPA monitoring detected Copper, Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Derry Boro Muni Auth serve?

Derry Boro Muni Auth reports serving 6,500 people in Pennsylvania, per its EPA record.

Has Derry Boro Muni Auth had any water quality violations?

The EPA has 335 violations on file for Derry Boro Muni Auth, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.