Tap WaterIndex

← Pennsylvania

Tap water quality report

Icmsa Plumville

EPA monitoring tested this supplier for 80 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

80
contaminants tested
15
detected
883
people served
0
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Ground water
Ownership
Local government
Counties served
Indiana

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
222
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2025-10-01 → 2025-10-31
MR Monitoring Resolved 2025-10-01 → 2025-10-31
MR Monitoring Resolved 2025-10-01 → 2025-10-31
MR Monitoring Resolved 2025-07-01 → 2025-09-30
MR Monitoring Resolved 2025-07-01 → 2025-09-30
MR Monitoring Resolved 2025-07-01 → 2025-09-30
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31
MR Monitoring Archived 2025-01-01 → 2025-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
623 µg/L 48%
of the EPA limit 1300 µg/L
 41/41 SYR4 2013–2019
Lead
40.4 µg/L 269%
of the EPA limit, in the worst sample — 15 µg/L
 10/36 SYR4 2013–2019
Bromodichloromethane
22.9 µg/L
No EPA limit set
 4/4 SYR4 2015–2019
Bromoform
13.9 µg/L
No EPA limit set
 4/4 SYR4 2015–2019
Chloroform
9.74 µg/L
No EPA limit set
 4/4 SYR4 2015–2019
Dibromochloromethane
27.5 µg/L
No EPA limit set
 4/4 SYR4 2015–2019
TTHM
70.6 µg/L 88%
of the EPA limit 80 µg/L
 4/4 SYR4 2015–2019
Total Haloacetic Acids (HAA5)
11.7 µg/L 19%
of the EPA limit 60 µg/L
 4/4 SYR4 2015–2019
Barium
634 µg/L 32%
of the EPA limit 2000 µg/L
 2/2 SYR4 2015–2018
Nitrate
1700 µg/L 17%
of the EPA limit 10000 µg/L
 2/14 SYR4 2013–2019
Trichloroacetic Acid
1 µg/L
No EPA limit set
 2/2 SYR4 2015–2019
Dibromoacetic Acid
1.2 µg/L
No EPA limit set
 1/2 SYR4 2015–2019
Dichloroacetic Acid
0.2600 µg/L
No EPA limit set
 1/2 SYR4 2015–2019
Fluoride
408 µg/L 10%
of the EPA limit 4000 µg/L
 1/2 SYR4 2015–2018
Lead
0.0202 mg/L 135%
above the EPA limit of 0.0150 mg/L
 1/1 LCR 2019
65 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MARTIN MASCHAK
Phone
724-349-6640

Frequently asked questions about Icmsa Plumville

Is Icmsa Plumville tap water safe to drink?

EPA monitoring detected 15 contaminants in Icmsa Plumville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Icmsa Plumville's water?

EPA monitoring detected Copper, Lead, Bromodichloromethane, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Icmsa Plumville serve?

Icmsa Plumville reports serving 883 people in Pennsylvania, per its EPA record.

Has Icmsa Plumville had any water quality violations?

The EPA has 222 violations on file for Icmsa Plumville, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.